3059P-1-103M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers are one of the most commonly used electronic devices. The 3059P-1-103M is a type of trimmer potentiometer that can be used for many fields and applications. This article will discuss the application field and working principle of this device.

The 3059P-1-103M trimmer potentiometer is essentially a three-terminal resistor with an adjustable resistance. This device can be used for many applications due to its ability to adjust its resistance. It can be used for setting the desired voltage, adjusting audio or video levels, and controlling DC appliances such as motors and solenoids.

This trimmer potentiometer can also be used for providing a variable resistance in circuits such as digital to analog converters, signal filters, and test instruments. It is also appropriate for use in power supply circuits where a fixed voltage is desired.

The 3059P-1-103M trimmer potentiometer works by adjusting the resistance across its three terminals. The three terminals are designated as A, B, and C. Terminal A is the positive terminal and terminal C is the negative terminal. The resistance between these two terminals is adjusted by rotating the knob on the side of the potentiometer. As the knob is turned, the resistance between these terminals increases or decreases accordingly.

The third terminal, B, is the middle terminal and is commonly referred to as the wiper. This terminal is used to transfer the resistance change from one side of the potentiometer to the other. As the knob is turned, the wiper moves and transfers the resistance change to the other two terminals.

The 3059P-1-103M trimmer potentiometer is a versatile device that is suitable for many applications. It can be used to set the desired voltage, control DC appliances, and provide variable resistances in test instruments and other electronic devices. It functions by adjusting the resistance between terminals A and C, while the wiper is used to transfer the change in resistance.

The specific data is subject to PDF, and the above content is for reference