3082P-1-202

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Trimmer Potentiometers

Trimmer potentiometers, or trimpots, are variable resistors that are often used for precision adjustments or calibrations in electronic circuits. They are typically mounted on printed circuit boards, as they are not intended for frequent adjustment; however, trimpots are available in a variety of sizes and configurations.

3082P-1-202 Application Field and Working Principle

The 3082P-1-202 trimpot is a precision potentiometer that is primarily used for fine-tuning in audio devices, such as amplifier circuits. It is designed to adjust the output of an amplifier, allowing for subtle changes in the frequency response. The taper on the 3082P-1-202 is linear, meaning that as the dial is turned, the resistance will increase in a linear fashion.

The 3082P-1-202 trimpot is constructed from ceramic, brass, and nylon. It features three terminals, one for each end of the resistor element, and one for the center wiper. The trimpot has a total resistance range of 500 ohms and is rated for a maximum current of up to 25 mA. It also offers a total resistance tolerance of ±20%, allowing for accurate adjustments.

Pros and Cons of Using a 3082P-1-202 Trimpot

The 3082P-1-202 trimpot is a versatile component that offers superior accuracy and reliability. It is also easy to install, as it is designed for standard through-hole mounting onto a printed circuit board. Additionally, the trimpot is relatively cheap and widely available.

However, the 3082P-1-202 trimpot does have some drawbacks. It has a relatively low maximum current rating and can be damaged if an excessive current is applied. Additionally, the trimpot is not designed for continuous adjusting and should only be used for precision tuning, otherwise it may wear out quickly.

Conclusion

The 3082P-1-202 trimpot is a precision variable resistor that is used for fine-tuning in audio devices. It features a linear taper and has a total resistance range of 500 ohms. It also offers a total resistance tolerance of ±20%, allowing for accurate adjustments. The 3082P-1-202 trimpot is an ideal choice for applications where precise adjustments are needed, such as amplifier circuits. However, it should not be used for continuous adjusting, as it is not designed for that purpose.

The specific data is subject to PDF, and the above content is for reference