30KPA270C-B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Diodes are a broad category of semi-conductors, designed to protect electronic equipment from electric surges and voltage spikes. They function as a protection device against voltage spikes from lightning and electrostatic discharge (ESD). One commonly used product to protect against these is the 30KPA270C-B.

The 30KPA270C-B is a unidirectional TVS diode that is often used to protect circuits from both high energy and repetitive fast transients. At 400W of power rating at 10/1000us waveform, the 30KPA270C-B has the ability to absorb surges up to 30,000 Watts. It can also withstand temperatures of approximately 150 degrees Celsius.

The 30KPA270C-B is designed for protection of data lines in telecommunications, computer, and industrial applications. It is able to reduce high voltages to safe levels, thus preventing circuit damage. It is capable of suppressing transients created by ESD, lightning, inductive load switching, and other sources. In terms of its physical characteristics, it is a small, flat black device. Its typical dimensions measure 2.4 mm x 1.6 mm x 0.5 mm in size.

The working principle behind the 30KPA270C-B is based on its triggering voltage. In operation, the device absorbs incoming surge voltages, and conducts current through its junction when an overvoltage is present. This voltage is known as the breakdown voltage, and it is typically in the range of 5.8V to 6.2V. When the voltage rises beyond the breakdown voltage, the current flow is activated and the voltage is clamped to the breakdown voltage level, limiting the amount of transient energy being sent to the protected device.

Once the voltage drops back below the breakdown voltage, the current flow is interrupted, and the 30KPA270C-B is returned to its nonconducting state. This process continues until all the surge energy has been absorbed and dissipated. The 30KPA270C-B is designed to have an extremely fast response time, which means it can respond to transients and protect the device in a matter of nanoseconds.

In conclusion, the 30KPA270C-B is a device designed to protect electronic equipment from electric surges and voltage spikes, which comes under the category of TVS - Diodes. It works by absorbing incoming surge voltages up to 30,000 Watts and conducting current through its junction when an overvoltage is present. It can protect circuits from ESD, lightning, inductive load switching, and other sources, and has an extremely fast response time.

The specific data is subject to PDF, and the above content is for reference