314349-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

314349-2 is a subset of Ethernet standards, and it has been widely used in the Ethernet industry. It defines the physical layer and Media Access Control layer (MAC) interface for the operation of 10 Mbps Ethernet over unshielded twisted pair (UTP) cable. While it was first standardized in 2002, the 314349-2 standard has been continued to be updated and revised, and is used by many Ethernet equipment manufacturers to ensure the reliability of Ethernet products.

The 314349-2 standard can be found in many different aspects of the Ethernet industry. It is used as an Ethernet transceiver standard, a physical layer standard, a Media Access Control (MAC) standard, and has been incorporated into emerging technologies like Gigabit Ethernet and Wireless Local Area Networks (WLANs). If a device uses the 314349-2 standard, it should be able to communicate with other devices that use the same standard. This ensures interoperability between devices.

The 314349-2 standard has many benefits, including its high speed, compatibility, and scalability. Its high speed means that it can handle data transmissions at a maximum rate of 10 Mbps, which is much faster than many other types of communication lines. In terms of compatibility, since 314349-2 is an open standard, it is compatible with a variety of other standards, including IEEE 802.3, HDLC, Ethernet frame protocol, and others. Finally, because it is a scalable standard, it can be easily adjusted to accommodate a changing network environment over time.

The 314349-2 standard defines an architecture and protocol to enable Ethernet communications over UTP cable. It does this through the use of two different data-link layers. The first is the MAC layer, which is responsible for the coordination of devices and the transmission of frames. The second is the physical layer, which is responsible for encoding and decoding data and determining the signal quality of the transmitted frames. The physical layer also defines the necessary link protocol between the two connected devices.

The basic working principle of the 314349-2 standard is simple. It defines an architecture and protocol that allows Ethernet signals to be transmitted and received over UTP cable. This is done by encoding and decoding data using the physical layer, and coordinating devices using the MAC layer. The signal quality is then determined by the physical layer, and if necessary, the protocol is adjusted accordingly. This way, Ethernet devices connected to a UTP network can communicate with each other efficiently and reliably.

In summary, the 314349-2 standard is an important part of the Ethernet industry. It defines a physical layer and Media Access Control layer for the operation of 10 Mbps Ethernet over UTP cable. It has many benefits, including its high speed, compatibility, and scalability. Its basic principle is to enable Ethernet communication over UTP cable by encoding and decoding data using the physical layer and coordinating devices using the MAC layer. As long as two devices are connected with the same standard, they should be able to communicate and give reliable data transmissions.

The specific data is subject to PDF, and the above content is for reference