314687-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

When assembling cables and wires, or any metal parts that need connection, you need a tool to bind and close the connection properly. This tool is known as a crimp. They enable the connection to be done securely so that the whole assembly works with integrity. The use of crimps is very common nowadays, and it’s worth familiarizing yourself with the different kind of crimpers available and what they are used for.

The 314687-1 application field and working principle falls into the category of Crimpers, Applicators, Presses - Accessories. It is an adjustable pneumatic crimping tool, with a capacity of 28 tons. Its operating pressure is 55-90 psi. This crimping tool is designed for both professional and industrial use. It is used to crimp lugs, terminals, ferrules, pins, and other miscellaneous metal parts.

The tool’s main component is a plunger cylinder. The plunger is powered by compressed air and moves up and down when the valve is open. The cylinder is connected to an adjustable pressure regulator, which allows you to adjust the amount of force applied to the crimp. The plunger is attached to a die head and holder. The die head serves as a base for the parts to be crimped, while the holder holds the parts in place. You can interchange the die head and the holder to accommodate the different types of parts to be crimped.

The die head is attached to a press frame. This is the part of the tool that exerts force on the parts. The press frame is connected to a control plate with a series of limit switches. These limit switches are configured so that at the end of the crimping cycle, it will switch off the compressor, thus preventing the over-crimping or crushing of the parts.

This tool comes with a variety of accessories. It is compatible with any type of die head and holder, depending on the size and type of crimp needed. There is also an adjustable depth stop, which enables precise and repeatable crimps. This tool also has an integrated touchscreen interface, which allows the user to set the desired crimp parameters.

Using the tool is fairly simple. First, the parts to be crimped must be clamped in place on the die head and holder. Then, the pressure regulator is adjusted to the desired crimping pressure. The limit switches are then set, and the compressor is switched on. The plunger moves up and down, applying a certain amount of force on the parts. At the end of the cycle, the limit switches switch off the compressor, and the parts are crimped.

The 314687-1 application field and working principle is a reliable and durable tool that is capable of crimping a wide variety of metal parts. It is relatively easy to use and is excellent for connecting and securing most types of parts. With its adjustable pressure regulator and limit switches, it provides an efficient and precise crimping process.

The specific data is subject to PDF, and the above content is for reference