3314G-2-204E

Trimmer Potentiometers are adjustable elements that permit the adjustment of a circuit. The 3314G-2-204E is a common type of trimmer potentiometer. This device is widely used in a variety of electronic related applications due to its small, low cost and simple construction.

The 3314G-2-204E is a two-terminal potentiometer consisting of three separate terminals. A wiper is connected to two terminals, while the third terminal is connected to a mass or ground. The wiring diagram for this device is shown in Figure 1.

Figure 1. Wiring diagram of the 3314G-2-204E trimmer potentiometer.

The 3314G-2-204E is used primarily in circuits to provide adjustable resistance. It can be used in applications such as volume control and tone control circuits in amplifiers, digital potentiometers for light dimming, and in motor speed control circuits.

The 3314G-2-204E is a variable resistor and its working principle involves the alteration of its resistance value as it is adjusted. This device has a slider that can be adjusted to change its resistance. The resistance value is determined by the slider\'s position. As the slider is moved, the resistance between the two terminals connected to the slider is changed.

The 3314G-2-204E has a relatively low resistance range, usually 1K ohm to 10K ohm, and it is typically used in applications that require only a small change in resistance. It is available in single turn and multi-turn versions, and the resistance can be adjusted either by hand or by a tool. The wattage rating of the device is usually determined by its physical size; larger devices normally have higher wattage ratings.

The 3314G-2-204E trimmer potentiometer is an inexpensive and convenient way to adjust the resistance of a circuit. It can be used in a variety of applications, including the adjustment of sound and illumination levels in electronics. Its size, low cost and simple construction make it a popular choice for designers and engineers.