3360P-1-204LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary Potentiometers, Rheostats

Rotary potentiometers, rheostats, or pots, are three-terminal devices that allow the user to adjust and measure the exact level of resistance. A 3360P-1-204LF (3360P for short) is a specific type of pot, and they come with their own unique applications and working principles.

Application

3360P pots are often used in electronic audio synthesizers, specifically those of the modular variety. They are employed to control the pitch of an audio signal, as well as its volumetric and tone controls. They are also commonly used to adjust the level of incoming signals to amplifiers, allowing for precise gain settings.

Among the advantages of 3360P pots is their superior temperature coefficient compared to other types of potentiometers. This feature ensures that even the slightest changes in temperature will not drastically alter the settings as is often the case with basic pots.

The 3360P was engineered to be smaller in size but still capable of providing consistently high performance. Additionally, it offers a DC resistance of 204 kilo-Ohms with an adjustable precision of up to 0.1%.

Working Principle

At the most basic level, a rotary pot is a resistor with a varying level of resistance in relation to an applied voltage. A 3360P works by having a spring-centered wiper arm that is attached to a shaft which can rotate around the exterior of the pot.

The resistance of a 3360P can be adjusted by the user through the wiper arm\'s position relative to the rest of the pot. When the arm is placed near the top end of the pot, it has a higher resistance, while a lower-positioned arm will result in a lower resistance. Changing the angle and position of the arm can help the user get the desired resistance output with the utmost precision.

The 3360P is composed of a ceramic substrate with three terminals. The two outer terminals are the ends of the resistor, while the middle terminal is the wiper arm. Since the pot is designed for high-frequency applications, the wiper and two outer terminals are isolated from each other to prevent any noise or interference.

The amount of resistance for the 3360P pot is highly dependant on the shaft\'s angle, as the arm length on the pot increases as the shaft rotates. This is why, when considering a pot with a given resistance level, the type of pot used is less important than the angle of the shaft.

Conclusion

3360P-1-204LF pots are the perfect choice for anyone looking for an accurate and reliable way to adjust and measure the level of resistance. They are designed for extreme precision and performance, and their small size makes them suitable for a wide range of applications. By understanding how their working principles operate, users can optimize their use to get the most out of their 3360P-1-204LF pot.

The specific data is subject to PDF, and the above content is for reference