3361P-1-205GLF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers, including the 3361P-1-205GLF, are resistant variable devices that help to adjust circuit parameters. They are primarily used to adjust bias and feedback resistors in amplifiers and transistor circuits. They are also used for feedback in voltage regulators, frequency-selective networks, and filters. The trimmer potentiometer has a five-turn wire wound element that provides a very precise form of adjustment in the range of 1.5 ohms to 250 ohms.

The 3361P-1-205GLF trimmer potentiometer is similar to a rotary rheostat but with a single turn screw driver shaft to adjust the resistance. It includes a brass bearing guide and body to reduce friction for reliable and accurate operation. It is a variable resistor for small signal applications with an NSN of 5905-00-486-5235. The rotation of the handle or knob allows the resistance to be adjusted from minimum to maximum depending on the desired effect.

The construction of the trimmer potentiometer is a sequence of conductive carbon particles on a ceramic disc, in series with a hard wiper that makes contact with the conductive particles. The resistance value is determined by the length of the path of the particles that the wiper lever is in contact with, thus increasing or decreasing the resistance. Its built-in versatile operating temperature range from -55°C to +125°C permits a wide range of operation and adjusts the resistance value in small increments.

The 3361P-1-205GLF trimmer potentiometer is a two-terminal device, with the resistance between the two terminals having a value of around 200 ohms. The two terminals are connected directly to each other as they both touch the center of the Rire. As the handle or knob is turned, the wiper causes the resistance to increase or decrease along the path. The wiper offers fixed contact points that allow for precise setting to a particular resistance value.

The 3361P-1-205GLF trimmer is generally used to adjust DC signals over a small amount of resistance. It is generally used in circuits and applications which require fine adjustment and tolerances, such as LED displays, audio systems, and instrumentation. It is also used as a circuit element to provide a precise voltage divider, control the light intensity of LEDs and lamps, and adjust the gain and time constants of amplifiers and filters.

In summary, the 3361P-1-205GLF trimmer potentiometer is a two-terminal device, with the resistance between the two terminals having a value of around 200 ohms. Its built-in versatile operating temperature range from -55°C to +125°C permits a wide range of operation and adjusts the resistance value in small increments. It is a variable resistor for small signal applications used to adjust DC signals over a small amount of resistance. It is suitable for applications such as LED displays, audio systems, and instrumentation, and for adjusting the gain and time constants of amplifiers and filters.

The specific data is subject to PDF, and the above content is for reference