3364A-1-103E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers refer to components which are used in circuits to adjust power within a pre-determined range. A potentiometer works by providing a variable voltage from one end to the other in a constant, linear fashion. In general, a potentiometer is composed of a rotating contact, referred to as a wiper, and two fixed contacts, referred to as terminals. A trimmer potentiometer, such as the 3364A-1-103E, is designed to enable the user to set the output voltage to the desired level.

The 3364A-1-103E is a trimmer potentiometer typically used for applications such as power supply circuits, audio circuits, and simple voltage controls. The most common use is for adjusting voltage over a predetermined range, or to tailor the response of a circuit. For example, the 3364A-1-103E is often used as a voltage divider to adjust the intensity of a light source, and it can also be used for voltage regulation. In a power supply circuit, the output voltage can be adjusted by using a 3364A-1-103E.

The 3364A-1-103E trimmer potentiometer is designed with two terminals and a middle wiper. The wiper is connected to a rotor, a sliding contact that can be adjusted to increase or decrease resistance. As the wiper is adjusted, the resistance between the two terminals increases or decreases, resulting in a change in voltage. The voltage level can be adjusted until the desired voltage is achieved.

The 3364A-1-103E also features a three-terminal design, which enables the user to separately control the output current and voltage. By adjusting the components of the 3364A-1-103E, the user can achieve the desired current and voltage output. The three terminal configuration makes the component ideal for power supply design work and other applications that require fine control over output current and voltage.

In order for the 3364A-1-103E trimmer potentiometer to work properly, it must be properly assembled. The wiper should be securely connected to the shaft and the appropriate terminals should be properly soldered onto the component. Additionally, the component should be properly grounded to ensure that the proper voltage is attained.

In summary, the 3364A-1-103E trimmer potentiometer is especially designed for applications that require fine control over the current and voltage output. This component is designed with two terminals and a middle wiper which is adjustable to increase or decrease resistance. Utilizing the 3364A-1-103E enables the user to achieve the desired output voltage and current, while it also needs to be properly assembled and grounded in order to attain the desired results.

The specific data is subject to PDF, and the above content is for reference