3386P-1-222

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer potentiometers are variable resistors which can be used to adjust a current or voltage level or to tune components in a circuit. The 3386P-1-222 is a type of trimmer potentiometer and is designed to be used in printed circuit boards. It offers dynamic performance in signal lines, and in audio applications such as tone, balance and volume controls.

A trimmer potentiometer consists of a resistive element, usually a wirewound element, and a mechanism which varies its resistance. The 3386P-1-222 trimmer potentiometer has three terminals - one is connected to the common terminal and the other two are connected to end terminals. The wiper, or the third terminal, is moved along the resistive element to vary the resistance between the terminals. The resistance can be varied from zero ohms to a few tens of thousands of ohms.

The 3386P-1-222 trimmer potentiometer has an operating temperature range of –40°C to +85°C, a voltage rating of 10V and a power rating of 0.5W. It is constructed from a thermoplastic body, a resistive element, carbon film contacts and a stainless steel shaft. The shaft has an anti-rotation pin to prevent the pocket from rotating accidentally, and is sealed with a polyester epoxy for protection against dust and moisture.

The 3386P-1-222 trimmer can be used in a variety of applications. It is commonly used to adjust pre-charge levels, contrast levels and timing of transistors. In audio applications, it can be used to adjust tone, balance and volume controls. In automotive electronics, it is used to control timing of ignition systems. In telecommunications, it is used to adjust the level of signalling devices.

The 3386P-1-222 trimmer potentiometer is normally operated manually, but can be attached to an automated system for maximum performance. The resistance can be adjusted by turning the shaft or by using a screwdriver or soldering iron. For maximum accuracy, an automatic system such as a servo system can be attached to the trimmer. This will ensure that the resistance is adjusted accurately and quickly.

In summary, the 3386P-1-222 trimmer potentiometer is a type of trimmer which is designed to be used in printed circuit boards. It offers dynamic performance and can be used in a variety of applications, such as to adjust pre-charge levels, contrast levels, audio controls and timing of transistors. It can be operated manually or can be attached to an automated system for maximum accuracy and performance.

The specific data is subject to PDF, and the above content is for reference