3570-1411-122

Turn Off Voltage (Min):	1 VDC
Coil Resistance:	1 kOhms
Coil Power:	144 mW
Contact Material:	--
Operating Temperature:	-40°C ~ 85°C
Termination Style:	PC Pin
Mounting Type:	Through Hole
Features:	EMI Shielded
Release Time:	0.1ms
Operate Time:	0.35ms
Series:	3570
Turn On Voltage (Max):	9 VDC
Switching Voltage:	200VDC - Max
Contact Rating (Current):	500mA
Contact Form:	SPST-NO (1 Form A)
Coil Voltage:	12VDC
Coil Current:	12.0mA
Coil Type:	Non Latching
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com



Introduction

Reed relays are electromechanical switches commonly used to control signals for on-off, logic, analog, and digital applications in a variety of electronic systems. The reed relay consists of a hermetically sealed glass tube containing magnetic reeds, which act as contacts, as well as a coil, which actuates the reeds and can be operated from an external voltage. When energized, the actuated reeds close, and the circuit is then connected. The reeds are designed to have a wide range of voltage and current ratings. Reed relays have a wide range of uses, from providing protection from internal failures to controlling analog and digital logic. This article will explain the 3570-1411-122 application field and working principle.

3570-1411-122

The 3570-1411-122 reed relay is a latching type, capable of low-resistance, reliable switching of signals. Its contact rating is 1A/16V DC, and its coil rated voltage is 5V DC. The operating life is 10,000 cycles and the contact resistance is 40mΩ max at 1A/12V. It is offered in a double-contact configuration and features zero cross over. It is commonly used for level detection, input and output isolation, signal buffering, time delay, logic decoding, and logic control.

Application Field

The 3570-1411-122 is primarily used in low-voltage, digital and logic-level applications, including process control, logic detection, circuit protection, communication systems, data acquisition systems, remote control, and other logic control tasks. It can also be used in analog and digital systems, for example, as a time-delay switch or a current monitor, to control signals for both on-off and logic operations. It can be found in industrial applications, such as motor control systems, temperature and pressure control systems, and other automation applications.

Working Principle

When a coil energizes the reed switch, a magnetic field is created, which moves the movable contact closer to the fixed contacts. This causes the contacts to close, thereby establishing a circuit or acting as a switch. The length of time that a circuit remains established depends on the strength of the magnet and the number of turns of the coil. When electrical power is removed from the circuit, the contacts move back to their original positions.

Conclusion

Reed relays provide a wide variety of applications, from providing protection from internal failures to controlling analog and digital logic. The 3570-1411-122 reed relay is a latching type device, capable of low-resistance, reliable switching of signals, and is typically used in low-voltage, digital and logic-level applications. The working principle of a reed relay is simple: when a coil energizes the reed switch, a magnetic field is created, which moves the movable contact closer to the fixed contacts and establishes a circuit or acts as a switch.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description