Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses: 3AB 3.5 Application Field and Working Principle

A 3AB 3.5 fuse is an electrical protective device which is intended to operate when excess amount of current passes during short circuit or ground fault from circuits. The 3AB 3.5 fuses are UL250 listed, meaning they meet the Underwriters Laboratory standards.

The 3AB 3.5 fuses have a number of uses in the field of electrical systems. The most common use of 3AB 3.5 fuses is to protect the electrical circuits from too much current being passed. The 3AB 3.5 fuses will blow open and stop the power when the current exceeds the rated value of the fuse. This prevents the electrical circuit from being damaged due to excessive current.

Another use for 3AB 3.5 fuses is for UL508A (Industrial Control Panels) application in the United States. This approval is used for industrial control panels, which includes a variety of applications. These applications include motor control, circuit protection, pumps, compressors, HVAC (Heating, Ventilation, and Air Conditioning), general control circuits, sensory devices, and lighting. By using a 3AB 3.5 fuse these applications can be properly protected and meet the UL508A requirements.

3AB 3.5 also have a number of additional features that add additional protection and value to their application. They provide protection up to 600VAC, include time-delay characteristics, and are UL 249 listed. The time-delay feature helps to allow enough current through to trip the fuse, allowing the fuse to break the circuit without damage. The UL 249 listing means the fuse has passed safety and performance tests in hazardous and non-hazardous industrial areas.

The working principle of 3AB 3.5 fuse is based on the heat generated by the high current flowing in the fuse path. In normal circuit operation, the maximum current is limited to the rated value of the fuse, but short circuit or ground fault may cause a sudden increase in current. With the increased current comes an increased amount of heat. When the heat reaches a threshold, the fuse will melt and open the electrical circuit, breaking the current.

In addition to the 3AB 3.5 fuse there are other sizes and codes available. Other codes include ATX, ATD, AT and ABS. ATX are for UL250 applications where the maximum amount of current is limited to 500V. These fuses are also UL listed and have the same time-delay characteristics as the 3AB 3.5. The ATD, AT and ABS fuses are UL listed and used for different applications.

The 3AB 3.5 fuse is a great solution for electrical systems that need additional protection when it comes to short circuit or ground fault. They have a number of uses in the electrical systems from UL508A applications, to general use. The 3AB 3.5 fuse also has additional features such as time delay, UL listing, and high voltage protection. As with all fuses, it is important to select one with the proper rating and follow all safety instructions.

The specific data is subject to PDF, and the above content is for reference