Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

3AG 100 Application Field and Working Principle

Fuses act as a preventative measure to protect electrical circuits, machinery and personnel from damage caused by occurrences of over-current. 3AG 100 fuses are cylindrical pieces of copper wire with metal strips encasing the copper.  The two pieces of metal strips work in a pair, creating an open circuit when the fuse is intact and closed circuit when an overload occurs and the fuse has been ignited.  An un-ignited 3AG 100 fuse, can be used multiple times, while an ignited one is only designed to be used once.

Application of 3AG 100 Fuse

3AG 100 fuses are used for industrial purposes mainly. Their primary purpose is to protect electronics from damage due to over-current.  The primary types of 3AG 100 fuses are Class G, Class J and Class L.  They are all designed to fit into a variety of fuse boxes and each has specific application in different industries.

Class G fuses are used to protect gadgets and appliances which require up to 20 amperes of power.  They are used in places where power overloads are rare.  Class J fuses are used forward and reverse fault protection, and are often used in power distribution systems where it is necessary to increase the protection of the equipment.  Class L fuses are used when a higher current requiring devices need protection.  These fuses are used for devices with current requirements greater than 20 amperes.

Working Principle of 3AG 100 Fuse

When a 3AG 100 fuse is exposed to any form of an electrical overload, the metal strip in the fuse expands.  This expansion causes the metal strips to join and in turn creates a short circuit.  As a result, it results over-current to reach the circuit board and quickly blows the fuse. Not only does this act as a safety feature, but it also helps to avoid any further damage to the device, or the circuit.  It is also important to note that, when the fuse has blown, it is no longer suitable for use.

Additional Features and Benefits

The 3AG 100 fuse is inherently reliable and reliable for a wide variety of circumstances.  It is designed to reduce the amount of surplus current that flows through the circuit, helping to prevent potential troubles.  It can also be used in places with high-level humidity, due to its added protection from moisture.  It is also very easy to install, as compared to other fuses, and is designed for use in both residential and commercial settings. Finally, 3AG 100 fuses are very cost effective.  Not only is its initial cost relatively low, but its lifespan is also quite long.

Conclusion

The 3AG 100 fuse is an important piece of protective equipment used in a variety of industries.  They are primarily used for protecting electrical circuits and machinery from damage due to over-current.  Its application generally ranges from Class G, Class J, and Class L, depending on the amount of current required.  The working principle of 3AG 100 fuses depends on the metal strip encasing the copper wire, which expands when excess current is present in the circuit, leading to an open circuit and eventual blow of the fuse.  The additional features of the 3AG 100 fuse are its innate dependability, its reliable protection against moisture, its easy installation and its cost-effectiveness.  In conclusion, the 3AG 100 fuse is an essential piece of protective equipment used to help avoid damage to circuits and machinery due to over-current.

The specific data is subject to PDF, and the above content is for reference