3N250-E4/72

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Bridge rectifiers are diode-based electronic components commonly used as an AC-to-DC rectifier in a variety of applications. They are also known as a full-wave rectifier, owing to the fact that they can rectify an entire sine wave of alternating current. The specific bridge rectifier considered in this article is the 3N250-E4/72; its application field, working principle and structure will be discussed.

Application Field

The 3N250-E4/72 bridge rectifier has two main applications: AC power rectification and AC power isolation. Its ability to rectify AC input to DC output makes it suitable for a variety of AC-to-DC conversion purposes, such as powering DC motors, mini-grinders, and other low-powered AC applications. In addition, due to its isolation capability, the 3N250-E4/72 bridge rectifier can be utilized in cases where electrical isolation is essential, such as audio devices, heating elements, and computer power supplies.

Working Principle

A full-wave rectifier, including the 3N250-E4/72, functions by using the two cathode-anode diodes to create a bridge-like circuit. The AC input is routed through the bridge rectifier via two positive and negative voltage nodes, creating a positive and negative output. This, in turn, supplies a direct current output, which has far fewer harmonics than the AC input, providing a much smoother current.

The rectifier is, essentially, a diode network. The four diodes in the rectifier conduction and block current alternately, even if the polarity of the input voltage changes. This ensures the maintenance of an unidirectional, or DC, flow of current from the input to the output, with only minimal interference from the AC input.

Structure

The 3N250-E4/72 bridge rectifier consists of four diodes connected in a bridge configuration. These diodes are combined in pairs, connected to the two input terminals, and the two pairs connected to two output terminals. Due to the configuration of the rectifier, it can be connected with either AC or DC input sources. The usage of four separate diodes ensures a better voltage and current capacity, as well high frequency operation, making the 3N250-E4/72 an ideal solution for isolation and rectification applications.

Conclusion

The 3N250-E4/72 bridge rectifier is well-suited for AC-to-DC rectification and isolation applications. The rectifier consists of four paired diodes in a bridge configuration, which allow for the unidirectional flow of current from AC sources of varying polarities. The 3N250-E4/72 has a higher voltage and current capacity than other bridge rectifiers, as well as a fast switching time and high frequency operation.

The specific data is subject to PDF, and the above content is for reference