3N259-E4/45

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes – Bridge Rectifiers

Bridge rectifiers, also referred to as four-quadrant rectifiers, are a type of diode that are used in a wide variety of applications. One of the most commonly used bridge rectifiers is the 3N259-E4/45. This bridge rectifier is commonly used in AC/DC applications, such as motor control circuits, led lighting, and switching power supplies. The 3N259-E4/45 bridge rectifier has a maximum forward current of 1 amp and a recurrent peak forward blocking voltage of 400 volts, making it a good choice for many AC/DC applications.

Bridge rectifiers convert alternating current (AC) to direct current (DC) and are composed of multiple sets of diodes. In the case of the 3N259-E4/45, the bridge rectifier is composed of four diodes that are connected together in a bridge configuration. This bridge configuration allows for the input AC signals to be processed in both the positive and negative directions, resulting in a direct unidirectional voltage output.

The working principle of the 3N259-E4/45 bridge rectifier is based on the forward-bias of the diodes. When an alternating current is applied to the input terminals, the diodes switch between the forward and reversed biases, depending on the voltage polarity. This switching action, combined with the bridge configuration of the diodes, enables the AC current to be converted to unidirectional DC current and then be outputted as a DC voltage.

In addition to its AC/DC applications, the 3N259-E4/45 bridge rectifier can also be used in other applications, such as audio amplifiers, battery chargers, electromagnetic locks, and voltage regulators. The bridge rectifier has a compact form factor, making it suitable for applications with limited space. Additionally, the bridge rectifier is relatively inexpensive, making it a cost-effective solution for a wide range of AC/DC applications.

In conclusion, the 3N259-E4/45 bridge rectifier is a commonly used four-quadrant rectifier that is widely used in a variety of AC/DC applications. The device is composed of four sets of diodes that are connected in a bridge configuration. This bridge configuration allows for the input AC signals to be processed in both the positive and negative directions, resulting in a direct unidirectional voltage output. Additionally, the bridge rectifier is relatively inexpensive and has a compact form factor, making it suitable for applications with limited space.

The specific data is subject to PDF, and the above content is for reference