40.508

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

40.508 is a standard that specifies the application and working principle of radio frequency systems operating in a frequency range of 88 - 108 MHz. This is often used for communication and broadcasting systems, such as in the FM and TV services. It is an internationally agreed specification, and sets out various guidelines and minimum requirements that must be met by a system if it is to be deemed compliant with this standard.

The application field of the standard covers systems for broadcasting, communication, and other services. Examples of these include but are not limited to, broadcast telephony, facsimile, digital television, cable television, cellular radio, radio navigation systems, as well as data services.

The working principle of the 40.508 standard dictates the maximum permissible antenna height limit, antenna installation requirements, available bandwidth for system transmission, and maximum output power levels on each of the frequencies in the band. It also sets out the allowable emission mask.

The standard also sets out detailed technical requirements for compatibility between systems operating in the same frequency bands. This includes, but is not limited to, the required frequency separation between multiple stations using the same frequency band, frequency selectivity criteria and the required sharing of the spectrum resource.

In addition, requirements are also set out to ensure protection of a receiver from any interference that may be caused by other systems operating in the band. Firstly, the allowable emission masks are defined, which must be adhered to, and secondly, intermodulation noise levels are specified which must be lower than the specified value.

Moreover, the standard also specifies the methods to be employed for avoiding interference between adjacent transmission sites. These methods are based on the spectral network of the transmission sites, transmission power restrictions, and transmission site separation. It also identifies the need for coordination between systems operating on adjacent channels in order to ensure compatibility.

Finally, 40.508 also tackled the aspects of transmission noise. It sets out the parameters that must be monitored and enforced, in order to ensure that emission sources are within allowed emission masks. Further, it sets out a list of noise levels to be monitored and enforced when measuring noise such as cross-modulation, third order intermodulation, and even-order intermodulation.

In summary, the 40.508 standard is an important aspect of radio frequency systems. It sets out the application field and working principle of these systems, including guidelines for their installation and operation. This standard is important for ensuring compatibility between different systems, and for protecting receivers from potential interference. It is highly recommended to be adhered to in order to ensure a successful operation of a radio frequency system.

The specific data is subject to PDF, and the above content is for reference