Allicdata Part #: | 40L45CW-ND |
Manufacturer Part#: |
40L45CW |
Price: | $ 0.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Vishay Semiconductor Diodes Division |
Short Description: | DIODE ARRAY SCHOTTKY 45V TO247AC |
More Detail: | Diode Array 1 Pair Common Cathode Schottky 45V 20A... |
DataSheet: | 40L45CW Datasheet/PDF |
Quantity: | 1000 |
Series: | -- |
Packaging: | Tube |
Part Status: | Obsolete |
Diode Configuration: | 1 Pair Common Cathode |
Diode Type: | Schottky |
Voltage - DC Reverse (Vr) (Max): | 45V |
Current - Average Rectified (Io) (per Diode): | 20A |
Voltage - Forward (Vf) (Max) @ If: | 530mV @ 20A |
Speed: | Fast Recovery = 200mA (Io) |
Current - Reverse Leakage @ Vr: | 1.5mA @ 45V |
Operating Temperature - Junction: | -55°C ~ 150°C |
Mounting Type: | Through Hole |
Package / Case: | TO-247-3 |
Supplier Device Package: | TO-247AC |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The 40L45CW is an array of four Schottky rectifiers packaged together in an industry-standard flat leaded chip carrier (FLC). Schottky diodes are known for their low forward voltage drop, usually ranging from approximately 0.2V to 0.3V. This makes it an ideal choice for use in low voltage, high current applications.
The 40L45CW is constructed in a hermetically sealed FLC package, which not only provides it with excellent electrical performance, but also a level of durability and longevity. The device is also RoHS compliant and compatible with reflow soldering techniques.
The 40L45CW is intended to provide isolation and protection in high voltage AC applications. Its low forward voltage drop and low leakage current make it ideally suited for such applications. It is further ideal for use in circuits where circuit isolation and protection must be maintained, such as in SCR-based lightning arrestors.
The 40L45CW is also suitable for switching applications that require high frequency operation, such as power supplies, DC/DC converters, switched-mode power supplies, and motor drives. In such applications, the low forward voltage drop combined with its low forward current helps to reduce power losses and provides a highly efficient power conversion system.
The 40L45CW utilizes a four-layer Schottky rectifier forming a bridge rectifier configuration. This is composed of two Schottky diodes connected in tandem. The forward end of one diode is connected to the junction of the other diode and the anode of the third diode, while the reverse end of the other diode is connected to the anode of the fourth diode. The anode of the first diode is then connected to the cathode of the second diode and the cathode of the third diode is connected to the anode of the fourth diode. This arrangement forms the rectification bridge.
The bridge rectifier works by allowing only the positive half-cycles of the AC signal to flow through and emerges as the DC output. When the AC signal is applied, the Schottky rectifiers will conduct current while they remain above their forward voltage. As the signal passes through the rectification bridge, it is converted to a DC signal with a peak output corresponding to the peak of the AC signal that was applied.
The 40L45CW can be used in a variety of applications, such as in AC-DC voltage inverters, off-line converters, and SMPS applications. In AC-DC voltage inverters, the 40L45CW can be used to provide isolation and protection, while also providing a level of efficiency and reliability. In off-line converters, the 40L45CW can be used to step-down the AC signal and increase the efficiency and reliability of the overall system. And in SMPS applications, the 40L45CW can be used to provide a low-cost and highly efficient power solution.
The 40L45CW is a highly efficient and reliable rectifier array which is designed for use in a variety of applications. Its low forward voltage drop and low leakage current make it ideal for use in low voltage, high current applications, while its hermetic FLC package ensures long term wavering reliability. It is also RoHS compliant, making it suitable for use in any type of system. As such, the 40L45CW provides a cost-effective and highly reliable solution for all your rectification needs.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
VS-40L45CWPBF | Vishay Semic... | 1.95 $ | 316 | DIODE ARRAY SCHOTTKY 45V ... |
VS-40L40CW-N3 | Vishay Semic... | 4.42 $ | 200 | DIODE ARRAY SCHOTTKY 40V ... |
VS-40L45CW-N3 | Vishay Semic... | 1.53 $ | 1000 | DIODE ARRAY SCHOTTKY 45V ... |
VS-40L40CWPBF | Vishay Semic... | 0.0 $ | 1000 | DIODE ARRAY SCHOTTKY 40V ... |
40L40CW | Vishay Semic... | 0.0 $ | 1000 | DIODE ARRAY SCHOTTKY 40V ... |
40L45CW | Vishay Semic... | -- | 1000 | DIODE ARRAY SCHOTTKY 45V ... |
DIODE SILICON 650V 17A TO220Diode Array ...
DIODE MODULE 600V 35A SM4Diode Array 1 P...
DIODE MODULE 1.8KV 120A D1Diode Array 1 ...
DIODE ARRAY SCHOTTKY 35V TO220ABDiode Ar...
DIODE MODULE 1.4KV 59ADiode Array 1 Pair...
DIODE ARRAY GP 400V 20A TO3PNDiode Array...