4105AB22100075 RF/IF and RFID

Series:	--
Part Status:	Active
Type:	Fabric Over Foam
Shape:	D-Shape
Width:	0.500" (12.70mm)
Length:	0.750" (19.05mm)
Height:	0.374" (9.50mm)
Material:	--
Plating:	--
Plating - Thickness:	--
Attachment Method:	--
Operating Temperature:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Application Field and Working Principle

The 4105AB22100075 is an extremely durable and dependable form of contact used in RF and EMI applications. It is often used in combination with a gasket and fingerstock to form an effective and reliable transmission line.The main application areas for 4105AB22100075 are high-power radio frequency (RF) and electromagnetic interference (EMI) suppression applications. These contacts are commonly used as a matrix for controlling, suppressing, and blocking radiation from getting into sensitive electronic circuits.The 4105AB22100075 consists of two parts, a conducting inner ring and an outer non-conducting ring. The outer ring is lined with a conductive material to ensure greater damping of emitted electromagnetic waves. When inserted into a cable or connector, the outer ring creates a Faraday cage-like enclosure for a transmission line. This helps to reduce the level of radiation that is transmitted from the system. The inner rings are also made of a conductive material that helps to reduce the amount of noise and other electromagnetic interference that enters the system.In addition to providing a shielding effect, the 4105AB22100075 is also useful for controlling the alignment and termination of high frequency circuits, as well as for controlling the isolation between various conductors in a system. This type of contact is very well suited for use in satellites, base station antennas, and other RF components.To ensure effective performance of the 4105AB22100075, it is essential to keep the outer non-conducting ring free of dirt and dust. The 4105AB22100075 should also be kept dry and should be stored in a low humidity environment. The contact should be inspected regularly and the contacts should be lubricated periodically to extend its life and maintain consistent performance.To install 4105AB22100075, one must first prepare the area by removing dirt and dust and then carefully rout out the holes for the contact. Once the contact is inserted into the pre-drilled holes, the gasket and fingerstock is positioned between the two body halves. The fingerstock provides a good connection with the inner ring. It is important to note that the gasket should be the same thickness as the filled cable or connector and should not protrude. The contact should then be secured into place with a standard nut and bolt arrangement.The 4105AB22100075 is an excellent choice for RF and EMI suppression applications and can be used in combination with various shielding and filtering techniques to ensure optimum protection against electromagnetic interference. It is also an ideal solution for enhancing and protecting transmission lines in a wide range of high-frequency circuit applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description