4116R-1-500

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays are components consisting of two or more resistors andTerminals connected in a specific configuration, and these components are used inmany applications, such as amplifiers, filters, shunts, voltage dividers, and audioequalizers.The 4116R-1-500 is a compact surface mount Resistive Array Package which canbe used in a variety of applications, such as gain control, volume control oramplitude balance and matching. The 4116R-1-500 is designed to provide asmaller footprint than traditional through-hole resistor networks, allowing productmanufacturers more flexibility in design and assembly.

The 4116R-1-500 consists of 16 resistors in a 4×4 array of 2×2 surface mountpads. The 16 resistors are grouped into 4 sets of 4, each resistor sharing twoterminals. The 4116R-1-500 is based on the same design concept as the 4100R-1-500, which has been used for many applications, however the 4116R-1-500is a larger version with more terminals and resistance values.

The resistance values of the resistors in the 4116R-1-500 are 0-20 ohms. Thisrange of resistance values can be used to create a variety of different volumecontrols, such as linear or logarithmic taper types, as well as gain control circuits.The 4116R-1-500 also provides a wide range of adjustable gain by changing theresistance values of the resistors.

The working principle of the 4116R-1-500 is based on the use of resistivevoltage dividers. A voltage divider is a two-terminal network with two resistorsconnected in series between the input and output terminals. By changing thevalue of either resistor, the voltage across the other resistor can be varied, thusproviding gain control or voltage level shifting.

In the 4116R-1-500, the 16 resistors are connected in various configurations toform 4 different sets of 4 resistors each. The 4 sets are connected in a specificpattern to allow the control of 4 different output voltages simultaneously. Theoutput voltage of each set can be adjusted by changing the resistance value of theappropriate resistor in the set.

The 4116R-1-500 is designed to provide a simple and cost-effective way ofimplementing a variety of applications, such as volume control, gain control,and amplitude balance and matching. The 16 resistor in the 4×4 array can beused in a wide range of configurations to create various types of circuits,ranging from simple linear tapers to more complex logarithmic tapers. Thesmall form factor of the 4116R-1-500 is ideal for space-constrained designs. The 4116R-1-500 is also RoHS compliant, making it an ideal solution for use inapplications where lead-free components are required.

The specific data is subject to PDF, and the above content is for reference