4116R-2-334

Number of Pins:	16
Height - Seated (Max):	0.185" (4.69mm)
Size / Dimension:	0.865" L x 0.300" W (21.97mm x 7.62mm)
Supplier Device Package:	16-DIP
Package / Case:	16-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	125mW
Series:	4100R
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	15
Tolerance:	±2%
Resistance (Ohms):	330k
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays and the 4116R-2-334 Application Field and Working Principle

A resistor network is an interconnected system of electrical resistors that are combined together to perform a specific function or set of functions in a circuit layout. While a single resistor can only control a limited amount of current, multiple resistors connected together can control a much larger current. The 4116R-2-334 is one of the most commonly used resistor networks.The 4116R-2-334 is a quad-resistor network that consists of four resistors connected in series and parallel configurations. Each leg of the network contains two resistors in parallel. This configuration allows for the network to have a higher current rating than a single resistor. The 4116R-2-334 is often used in applications where high current is needed but precise control of the current is desired as well. The resistor network is connected to a power source, such as a battery, and the voltage is distributed to the resistors based on their resistance values. The current is divided among the resistors according to their individual resistance values, allowing the circuit to draw current according to its own voltage needs. This is useful for circuits that require a specific amount of current, such as an amplifier or a motor, without needing to adjust the voltage of the power source. One of the main applications of the 4116R-2-334 is as a voltage regulator. By controlling the amount of voltage that is supplied to the circuit, the resistor network is able to maintain a stable voltage level throughout the circuit. This is important in applications where any voltage fluctuations can cause damage to sensitive components, such as microprocessors or memory chips. The resistor network can also be used in current-limiting applications, where the current is kept within a specified range.Another application of the 4116R-2-334 is in radio frequency (RF) circuits, where the resistor networks help to adjust the operating frequencies and reduce the level of interference from other devices. As the frequency is increased, the resistors’ resistor values decrease, allowing the circuit to consume less power at the higher frequency. The 4116R-2-334 is also used in filtering applications. In this case, the resistor network is used to filter out certain frequencies while still allowing other frequencies to pass through. This is helpful in audio applications, for example, where certain frequencies may need to be eliminated.In addition to the many applications of the 4116R-2-334, the device can also be used for noise cancelling. When two or more of these resistors are connected together, the total resistance will be equal to the sum of the individual resistors. This makes it possible to reduce or eliminate the noise from the current in a circuit, such as in a line amplifier.The 4116R-2-334 is an enormously versatile resistor network that can be used in a variety of situations to regulate current, control voltage, reduce interference, filter out certain frequencies, and even cancel out noise. Its ability to be used in so many different applications is a testament to its quality and usefulness.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description