4116R-R2R-102LF

Number of Pins:	16
Height - Seated (Max):	0.185" (4.69mm)
Size / Dimension:	0.865" L x 0.300" W (21.97mm x 7.62mm)
Supplier Device Package:	16-DIP
Package / Case:	16-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	125mW
Series:	4100R
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	16
Tolerance:	±2%
Resistance (Ohms):	1k, 2k
Circuit Type:	R2R Ladder
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays and the 4116R-R2R-102LF Application Field and Working PrincipleResistors are electrical components used in electronic circuits to limit current and regulate voltages.Resistor networks, arrays, and configurations are used in analog and digital applications to provide a wide variety of functionality.Among these configurations, the 4116R-R2R-102LF is a commonly used network of resistors and is found in many applications.The 4116R-R2R-102LF is a two-row resistor network array containing 104 elements connected between two rails.Each row is composed of 102 resistors and the 102LF denotes that all of the resistors in this network are in a 0402 size package.The 4116R-R2R-102LF has two pinout options, a basic element count of 104 or a reduced pin option of 98.It is also available with two tolerance options, with 0.1% accuracy as standard.The 4116R-R2R-102LF can be used in two main applications, magnitude-based and timing-based.In magnitude-based applications, the network array is used to produce linear voltage or current ratios.It is used to convert an input signal, such as a voltage or a current, into a proportional or scaled output signal.It is also used in applications where a precision resistance reference is required, such as in the production of precise resistance references for embedded electronics or in systems for calibration or testing.In timing-based applications, the 4116R-R2R-102LF is used to produce a network of resistors that respond to an input signal with a specific waveform.This waveform is shaped by the connected resistors in the network array, which helps control the rise and fall times of the output signal.The 4116R-R2R-102LF is also used in delay timing applications, where it is used to create a delay between the input and output signals.The 4116R-R2R-102LF can be used in a variety of other applications as well, such as waveform production, test equipment, communications, and digital signal processing.It can be used as a voltage divider to reduce the voltage level of an input signal, or as a low-pass filter to reduce high-frequency noise.The 4116R-R2R-102LF works on the principle of resistive division.When an input voltage is applied across the network, the voltage is divided among the resistors in a voltage divider circuit according to their resistance values.The voltage across each resistor can then be used to create a linear voltage output or a signal with a specific waveform.The resistors in the array can be adjusted as needed to create the desired output.In summary, the 4116R-R2R-102LF network is a two-row resistor array containing 104 elements connected between two rails.It is used in magnitude-based and timing-based applications to produce linear voltage or current ratios, precision resistive references, waveforms for signals, and voltage dividers for reducing the voltage level of an input.It works on the principle of resistive division, where the voltage applied across the network is divided among the resistors according to their resistance values.This makes it an important component in many applications, ranging from embedded electronics to communications and digital signal processing.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description