416XA102P

Series:	416, Citec
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Resistance:	1 kOhms
Power (Watts):	0.2W, 1/5W
Tolerance:	±25%
Temperature Coefficient:	±250ppm/°C
Number of Turns:	1
Adjustment Type:	Side Adjustment
Resistive Material:	Cermet
Mounting Type:	Through Hole
Termination Style:	PC Pins
Size / Dimension:	Rectangular - 0.331" x 0.268" Face x 0.331" H (8.40mm x 6.80mm x 8.40mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers

Trimmer potentiometers are small variable resistors used to adjust the current or voltage in a circuit. They are typically used in electronic circuits to adjust various parameters such as frequency, gain, or power levels. One of the most common trimmer potentiometers is the 416XA102P.The 416XA102P is an adjustable, two-terminal, single-turn trimming potentiometer with a temperature coefficient of resistance (TCR) of about 5 %. It has an overall resistance range of 100 ohms to 10 kilo-ohms, with a resistance tolerance of ±20 %. It is typically constructed from a conducting metal film and is insulated from the PCB using an isolation film or insulator.The 416XA102P is designed to be used as a trimming potentiometer in a variety of applications. It is often used in power control circuits, where it is used to adjust the operating voltage or current, or to regulate the motor power or speed. The 416XA102P can also be used in audio or video circuits to adjust the gain, frequency, or impedance of the signal. It is also used in radio circuits to adjust the resonance or frequency response of the antenna.The 416XA102P works by adjusting the resistance of its two terminals, which in turn affects the current flowing through the circuit. When the two terminals of the pot are adjusted, the resistance between them changes. This causes a change in the voltage or current of the circuit, depending on the configuration of the circuit. If the terminals are connected in series, then changing the resistance of the potentiometer will affect the current flow through the circuit. Similarly, if the terminals are connected in parallel, then changing the resistance will affect the voltage across the terminals.In order to adjust the potentiometer, a small screwdriver or other tool is used to turn the shaft of the pot. This will make a fine adjustment to the resistance between the two terminals of the potentiometer. The amount of resistance change is proportional to the angle of rotation of the shaft. It is possible to adjust the resistance up to a maximum of about 10 kilo-ohms. Beyond this level, the resistance will not increase.The 416XA102P is a versatile and reliable trimming potentiometer, and is widely used in a variety of applications. It is well-suited for use in power, audio, video, and radio circuits, and it can be easily adjusted with a small screwdriver or similar tool. The 416XA102P is a reliable and low-cost component that is used in many electronic circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description