41F1R0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are components that are used to limit the current that flows through a given electrical circuit. They can be wirewound, carbon composition, or film type components. 41F1R0 is a through hole resistor that is designed for applications where an isolation barrier is necessary for the circuit.

The 41F1R0 is a three-terminal resistor with two terminals placed at one end and the other terminal at the other end. It is made from a solid strip of steel that has a series of open pores and is coated with metal oxide. The two terminals at one end of the resistor are connected to the power supply while the other terminal is connected to the load. Due to the open pores on the surface of the steel strip, a resistive layer is formed between the power supply and the load, which limits the current that flows through the circuit.

The 41F1R0 has a variety of applications. It is commonly used in high-precision switching applications, such as in lighting and fiber-optic systems, where accurate current limiting is necessary. It can also be used in audio and video systems to provide a common ground between different components. It is commonly used in motor control systems, such as air conditioners and electric motors, where it provides a safety feature to limit the current and prevent damage to the motor or system.

The 41F1R0 resistor is also used in medical applications where it is necessary to limit the current to prevent any risk of medical device failure or injury. It is also used in aerospace and military applications where an isolation barrier is necessary for the circuit.

The working principle of the 41F1R0 is based on Ohm’s Law, which states that the current that flows through a linear resistor is directly proportional to the voltage applied across it. The voltage applied across the resistor creates a potential difference between the two terminals, which in turn creates an electric field that is resisted by the resistive layer on the surface of the steel strip. This resistance causes the current to be limited and prevents it from getting too high, which would otherwise damage the circuit.

The 41F1R0 resistor is a useful component in many electronic applications, as it provides an isolating barrier between the power supply and load and helps to keep the current at a safe and controllable level. It is an essential component in a wide variety of circuits, from medical systems to lighting and motor control systems.

The specific data is subject to PDF, and the above content is for reference