424EN31-RB2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Snap action, limit switches are electrically operated switches which contains a movable actuator that is pushed by an external force. The force is created by a movement or a change in the current. In this article, the 424EN31-RB2 switch and its associated applications and working principles will be discussed.

The 424EN31-RB2 switch is a miniature switch with a robust housing suitable for both industrial and non-industrial applications. It is designed to operate under extreme conditions with a maximum current rating of 50 A and a contact resistance of 0.1 Ohms. It is suitable for use in a variety of applications, such as automotive, military, energy and other industrial applications.

The424EN31-RB2 switch consists of two main components: the actuator and the contacts. The actuator consists of a spring loaded ball that is held in place by a guide pin. When an external force is applied to the actuator, the ball is released and the contacts are closed. This action is what gives the switch its snap action characteristics.

The424EN31-RB2 switch can be used in a wide variety of applications, including automotive engine control systems, military applications, process control and alarm systems. In automotive engines, the switch is used to activate the fuel injectors when the engine is started and to relay the engine speed information to the engine control unit. In military applications, the switch can be used to activate a warning system or to detect the presence of an intruder.

The working principle of the 424EN31-RB2 switch is based on the movement of a spring-loaded actuator ball. When an external force is applied to the actuator, it releases the ball, which closes the contacts of the switch. The contacts then remain closed until the external force is removed, at which point the actuator returns to its original position and the contacts open. This type of switch is especially useful for applications where rapid response to an external force is required.

In summary, the 424EN31-RB2 is a robust snap action, limit switch designed for a variety of applications. The switch consists of an actuator ball that is released when an external force is applied, allowing the contacts to close. When the external force is removed, the actuator returns to its original position and the contacts open. This switch has a maximum current rating of 50 A and a contact resistance of 0.1 Ohms, making it suitable for a range of industrial and non-industrial applications, such as automotive engine control systems, military applications, and process control systems.

The specific data is subject to PDF, and the above content is for reference