Allicdata Part #: | 43F900E-ND |
Manufacturer Part#: |
43F900E |
Price: | $ 0.80 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 900 OHM 3W 1% AXIAL |
More Detail: | 900 Ohms ±1% 3W Through Hole Resistor Axial Wirew... |
DataSheet: | 43F900E Datasheet/PDF |
Quantity: | 223 |
1 +: | $ 0.72450 |
10 +: | $ 0.64170 |
25 +: | $ 0.59004 |
50 +: | $ 0.53820 |
100 +: | $ 0.46575 |
250 +: | $ 0.39330 |
500 +: | $ 0.33120 |
1000 +: | $ 0.27531 |
5000 +: | $ 0.26393 |
Series: | Ohmicone® 40 |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 900 Ohms |
Tolerance: | ±1% |
Power (Watts): | 3W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±20ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.220" Dia x 0.594" L (5.60mm x 15.10mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through-hole resistors are large cylindrical components designed for installation onto a printed circuit board (PCB). They are constructed from a single piece of non-magnetic material such as steel or aluminum and typically feature a lead on either end and a ceramic disc in the center. The lead can be in direct contact with the metal, or it can be protected by an insulating layer of plastic, rubber, or nylon. Through-hole resistors are designed to be mounted directly onto the PCB with a hole to feed the lead through before soldering it into place.
The 43F900E is a through-hole resistor that is designed specifically for industrial applications. It features a ceramic-metal construction, which makes it the ideal choice for applications requiring superior thermal performance. It also has a low inductance that ensures accurate electrode positioning and a higher resistance to voltage transients. It offers superior electrical performance compared to other through-hole resistors, making it the best choice for power electronics and power supply applications.
The working principle of the 43F900E is based on Ohm’s Law. This law states that the current flowing through a resistor is directly proportional to the voltage applied across it. What this means is that when the voltage is increased, the current will also increase. As such, the 43F900E uses this principle to limit the current passing through a circuit. By increasing the resistance of the resistor, the current will be reduced, thus providing the desired protection to the circuit.
The 43F900E can be widely used in a variety of different industrial applications. It is particularly useful in applications that require high power dissipation, such as motor control, power supplies, and LED lighting. It is also used in automotive, medical, and consumer electronics. The 43F900E is also suitable for high-voltage applications, such as those where lightning and other forms of electrical surge can affect circuit performance.
This through-hole resistor is ideal for applications that require reliable and consistent performance. It is relatively quick and easy to install, making it suitable for a range of different applications. It also offers superior electrical performance, making it a great choice for power electronics and power supply applications. Furthermore, its ceramic-metal construction ensures its superior thermal performance.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...