Allicdata Part #: | 43F9K0E-ND |
Manufacturer Part#: |
43F9K0E |
Price: | $ 0.84 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 9K OHM 3W 1% AXIAL |
More Detail: | 9 kOhms ±1% 3W Through Hole Resistor Axial Wirewo... |
DataSheet: | 43F9K0E Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 0.75600 |
Series: | Ohmicone® 40 |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 9 kOhms |
Tolerance: | ±1% |
Power (Watts): | 3W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±20ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.220" Dia x 0.594" L (5.60mm x 15.10mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors43F9K0E is a type of through hole resistor. It has a wide variety of applications in both industrial and consumer applications. Through hole resistors are components that provide electrical resistance in circuits. They are used to reduce or limit current flow, provide protection against overloads, and also to provide an adjustment of signal levels.In order to understand how a through hole resistor works, it is important to understand the three fundamental components that make up its design. The first component is the resistor itself, which is made of a semiconductor material. This material can be made from silicon, germanium, or polysilicon, and consists of a thin film of electrical resistance. The second component is a metallic contact plate, which is used to connect the resistor to the circuit. Finally, the third component is a gas which is used to cool the components.The working principle of a 43F9K0E through hole resistor is very simple. When a voltage is applied to the resistor, electric charge is passed through the resistor material. This then causes the material to become resistance to current flow, because the electric charge is limited by the resistance of the material. This is also why through hole resistors are used in a circuit to limit current flow.When it comes to applications, 43F9K0E through hole resistors are primarily used in industrial applications. They are usually used in the power electronics such as motor controllers, voltage and current regulators, and other power circuits. They are also used in consumer applications such as audio amplifiers, computers, and other consumer electronics. In addition, they are used as heaters in thermistors, where their resistance increases as the temperature rises.Overall, 43F9K0E is a type of through hole resistor that is used for a variety of applications in both industrial and consumer applications. The through hole resistor works simply by using electricity to pass through the resistor material and limiting the current flow. They are used in a variety of applications where it is important to limit current flow, provide protection against overloads, and also for a variety of heating applications. With so many advantages, this type of through hole resistor is an important component in many circuits.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...