4420P-601-270/500

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI Filters have become an important part of electronic systems in recent years, as more devices require protection from the EMI or RFI interference. The LC and RC Networks are two common EMI/RFI Filters that are widely used and capable of achieving remarkable filtering performance. The 4420P-601-270/500 is a typical example of an LC and RC Network Filter.

Architecture of LC and RC Networks

The LC and RC Network Filters are a combination of inductors, capacitors, and resistors. Each component of the filter is connected in series or in parallel to achieve a desired frequency response. The LC Network is composed of a combination of capacitors and inductors, and it is primarily used for higher frequencies, such as for suppressing higher frequency EMI/RFI interference. The RC Network consists of a combination of resistors and capacitors, and it is most useful for lower frequencies as it provides superior low frequency attenuation capabilities.

Application Field of the 4420P-601-270/500

The 4420P-601-270/500 is an LC and RC Network Filter designed for the application in the audio and video systems. The filter has a frequency range of 270 kHz to 500 MHz and provides up to 70 dB of attenuation for both low frequency EMI/RFI interference (below 1 MHz) and high frequency EMI/RFI interference (above 10 MHz). The maximum insertion loss is 2 dB, which is ideal for providing a clean and distortion-free signal even in noisy environments.

Working Principle of the 4420P-601-270/500

The 4420P-601-270/500 uses the LC and RC Networks to filter out EMI/RFI interference. The inductors are used for higher frequencies and the capacitors are used for lower frequencies. The network is composed of series- and parallel-connected components that produce a band-pass filter that attenuates frequencies outside the specified range. The combination of resistor-capacitors (RC) is also used to dampen signal ringing caused by the resonance of the LC components, improving the signal integrity of the filtered signal.

The 4420P-601-270/500 also has an integrated ferrite core for better isolation performance. The core is connected in parallel to the filter network and helps to further reduce EMI/RFI interference. The ferrite also acts as a shield, limiting electromagnetic noise from the filter circuit.

Conclusion

The 4420P-601-270/500 is an LC and RC Network Filter designed for audio and video system applications. The filter features a wide frequency range of 270 kHz to 500 MHz, with up to 70 dB of attenuation for EMI/RFI interference. The filter network is composed of a combination of series- and parallel-connected components in a LC and RC topology, while the ferrite core provides additional isolation from EMI/RFI interference and helps to reduce electromagnetic noise.

The specific data is subject to PDF, and the above content is for reference