Allicdata Part #: | 452101-2-ND |
Manufacturer Part#: |
452101-2 |
Price: | $ 333.68 |
Product Category: | Tools |
Manufacturer: | TE Connectivity AMP Connectors |
Short Description: | ANVIL |
More Detail: | N/A |
DataSheet: | 452101-2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 303.34500 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crimpers, Applicators, Presses - Accessories
452101-2 is a type of accessory that can be used in conjunction with various types of crimpers, applicators and presses. This accessory has a very specific design that allows it to fit onto almost any metal surface and to hold the crimper, applicator, or press firmly in place. Due to the parts construction, it can be used in tight spaces and can be adjusted to obtain different types of tension.
The principle behind the 452101-2 is the clamping effect. When the accessory is properly mounted onto the metal surface, it is able to exert a consistent and strong force on the crimper, applicator, or press. This is achieved by the two parts included on the accessory which press against both sides of the metal surface.
The main benefit of using 452101-2 is that it provides more consistent and reliable results than manual methods. Manual methods of holding a crimper, applicator, or press in place can lead to uneven and varying results, but when the accessory is used, the tension is consistently applied. The accessory also allows for intricate parts to be handled in tight spaces without the risk of damaging the part.
The 452101-2 is easy to install and use. All that is needed is to mount the accessory onto the metal surface and then to adjust the tension using the screws provided. The screws can be used to adjust the pressure applied to the metal surface, allowing for more precise and accurate results.
The 452101-2 is used in a variety of different applications. It is commonly used in crimping applications to attach wires or other components to metal surfaces. It is also used in the production of press fittings, where it is used to apply a consistent force over a large area. The 452101-2 can also be used in applications where a tight, consistent fit is needed.
In conclusion, the 452101-2 is an extremely useful accessory for crimpers, applicators, and presses. Its clamping action provides consistent and reliable results and it is easy to install and use. Additionally, it can be used in a variety of different applications where a tight and secure fit is needed.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
62684-452100ALF | Amphenol FCI | -- | 22000 | CONN FPC TOP 45POS 0.50MM... |
62684-452100AHLF | Amphenol FCI | 0.19 $ | 1000 | CONN FPC TOP 45POS 0.50MM... |
62684-45210E9ALF | Amphenol FCI | 0.33 $ | 1000 | CONN FPC TOP 45POS 0.50MM... |
62684-452160AHLF | Amphenol FCI | 0.15 $ | 1000 | CONN FPC TOP 45POS 0.50MM... |
62684-452121AHLF | Amphenol FCI | 0.16 $ | 1000 | CONN FPC TOP 45POS 0.50MM... |
F05E-452146R | Harwin Inc. | 0.0 $ | 1000 | CONN FPC BOTTOM 45POS 0.5... |
62684-452100 | Amphenol FCI | 0.0 $ | 1000 | CONN FFC TOP 45POS 0.50MM... |
45214 | Parallax Inc... | 0.0 $ | 1000 | PROGRAMMER SX-KEY USBSX M... |
4521101ADELI | 3M | 301.81 $ | 1000 | ZETA PLUS DEL SERIES FILT... |
1-452127-3 | TE Connectiv... | 319.13 $ | 1000 | CRIMP,WIRE"F"SPL(042FX075... |
452127-1 | TE Connectiv... | 319.13 $ | 1000 | CRIMPER F |
452127-4 | TE Connectiv... | 319.13 $ | 1000 | CRIMPER F SPECIAL |
452121-1 | TE Connectiv... | 689.33 $ | 1000 | GUIDE REAR STRIP |
452127-5 | TE Connectiv... | 295.22 $ | 1000 | CRIMPER F SPECIAL |
452101-2 | TE Connectiv... | 333.68 $ | 1000 | ANVIL |
HFBR-4521Z | Broadcom Lim... | 4.7 $ | 968 | HDWR V-LINK HCS CONN/CRIM... |
HFBR-4521 | Broadcom Lim... | 0.0 $ | 1000 | HDWR V-LINK HCS CONN/CRIM... |
452117-2 | TE Connectiv... | 0.69 $ | 1000 | PLATE FEED |
452112-1 | TE Connectiv... | 1.39 $ | 1000 | SLIDE-SHEAR |
452111-1 | TE Connectiv... | 5.54 $ | 1000 | BLOCK MOUNTING |
452129-1 | TE Connectiv... | 384.62 $ | 1000 | PLATE SHEAR |
4521-0 | Pomona Elect... | 3.12 $ | 72 | MICROGRABBER W/.025 SQ PI... |
4521-2 | Pomona Elect... | 3.12 $ | 41 | MICROGRABBER W/.025 SQ PI... |
45210 | Wiha | 0.0 $ | 1000 | TWEEZER POINTED FINE 34 4... |
45212 | Wiha | 0.0 $ | 1000 | TWEEZER POINTED FINE 35 4... |
45213 | Wiha | 0.0 $ | 1000 | TWEEZER POINTED FINE 35B ... |
45211 | Wiha | 0.0 $ | 1000 | TWEEZER POINTED FINE 34B ... |
45218 | TE Connectiv... | 2.77 $ | 1000 | TOOL DIE CES ECV-ECN 18-1... |
45215 | Wiha | 3.23 $ | 1000 | SCREWDRIVER POZIDRIV #1 7... |
452116-1 | TE Connectiv... | 218.06 $ | 1000 | WIRE STOP & STRIPPER |
45210-500200 | 3M | 1.77 $ | 278 | CONN HEADER .05" 10POS RA... |
45210-220230 | 3M | 3.47 $ | 1000 | CONN HEADER .05" 10POS SM... |
45214-220230 | 3M | 3.69 $ | 1000 | CONN HEADER .05" 14POS SM... |
45212-600230 | 3M | 2.03 $ | 528 | BOARDMOUNT HEADER .050" 1... |
45210-620230 | 3M | 3.8 $ | 122 | BOARDMOUNT HEADER .050" 1... |
45216-220230 | 3M | 3.82 $ | 1000 | CONN HEADER .05" 16POS SM... |
45216-620230 | 3M | 4.16 $ | 511 | BOARDMOUNT HEADER .050" 1... |
45214-600230 | 3M | 2.21 $ | 191 | BOARDMOUNT HEADER .050" 1... |
45212-620230 | 3M | 3.97 $ | 164 | BOARDMOUNT HEADER .050" 1... |
45210-520230 | 3M | 4.06 $ | 780 | CONN HEADER .05" 10POS RA... |
RETAINER PLATE/STRIP CUTOFF
GAGE PIN ASSEMBLY
LOCATOR MINI EJECTOR
MEP-6T TOUCH SCREEN/MESSAGE SYST
SEATING TI ASSEMBLY
INSET TL ASSY 5 PR 14 COLUMN