4610X-101-332LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 4610X-101-332LF is a resistor network that is composed of three independent 10K ohm resistors. It can also be known as an array, which is an electrical device that holds multiple resistors in the same unit. Arrays are commonly used in electronic circuitry as a way to reduce complexity, and for layout and optimization purposes. The 4610X-101-332LF is a 10K ohm three resistor array that has been designed for use in environments where the resistance to noise is critical.

A resistor network, or array, is comprised of multiple resistors arranged into an electrical circuit. This arrangement of resistors has the effect of splitting the input signal into various different parts, each with a unique resistance. This method of dividing up an input signal is often used in analog circuits, as well as providing noise protection. In the case of the 4610X-101-332LF, the three resistors are in parallel, which means that they each have the same resistance. Because of this, the output will be the same as if a single 10K ohm resistor was used, just split-up.

The 4610X-101-332LF is designed with high-reliability, as it has a low-pass filter which reduces the noise that would otherwise affect the circuit. This array is also designed with high surge protection which allows it to survive short-term overloads. In terms of mounting, the 4610X-101-332LF can be soldered directly onto a PCB. This makes it easy to install and use in a wide array of circuits.

The working principle of the 4610X-101-332LF is based mostly on the fact that it is composed of three separate, independent 10K ohm resistors. As mentioned above, because the resistors are arranged in parallel, each one has the same output resistance. This allows the three resistors to act as one, while still being individually able to handle external stresses.

The 4610X-101-332LF is a versatile resistor network that is designed to protect against noise in critical environments. It is capable of handling high surge protection and is designed to be easy to install directly onto a PCB. Overall, it is a great choice for any circuit where noise-protection is vital.

The specific data is subject to PDF, and the above content is for reference