4633AF51K00480

Series:	--
Part Status:	Active
Type:	Fabric Over Foam
Shape:	Bell
Width:	0.299" (7.60mm)
Length:	4.800" (121.92mm)
Height:	0.098" (2.50mm)
Material:	Polyurethane Foam, Nickel-Copper Polyester (NI/CU)
Plating:	--
Plating - Thickness:	--
Attachment Method:	--
Operating Temperature:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RFI and EMI - Contacts, Fingerstock and Gaskets

The 4633AF51K00480 is a type of contact that is typically used in radio frequency interference (RFI) and electromagnetic interference (EMI) applications. It is designed to provide a shielded, low impedance connection between electrical components. This type of contact typically consists of a metal fingerstock, a base plate, and a contact plate. The fingerstock is typically made of either steel or a combination of steel and non-magnetic material.The fingerstock is typically designed with a spring-loaded contact that makes electrical contact between the base plate and the contact plate. This is done by pressing the fingerstock onto the contact plate and maintaining the necessary force to keep the electrical contact. The fingerstock can also be designed to make contact with multiple contact plates or multiple base plates. This is known as a “high-density” contact and is designed to provide increased electrical performance.The base plate is typically made of either steel or a combination of steel and copper. The base plate provides the necessary force to keep the fingerstock pressed against the contact plate. This is generally referred to as “spring contact”.The contact plate is typically made of either copper or an alloy of copper. The contact plate is designed to provide an electrical connection that is low in impedance. The contact plate also provides a surface for the electrical components to make contact with the fingerstock.The 4633AF51K00480 can also be designed to include a gasket that is designed to act as a shield between the electrical components and the environment. The gasket is typically made of rubber or plastic.The use of the 4633AF51K00480 contact greatly reduces the amount of electromagnetic interference (EMI) that is present in electrical systems. The contacts provide a low impedance connection, which reduces the amount of EMI that can be created by the system. Additionally, the contact’s design provides a shielded interface between the electrical components and the environment. This is done by preventing signal transmission through the contacts, and thereby reducing the amount of EMI that can be detected by external sources.The 4633AF51K00480 contact is typically used in applications where high levels of EMI are present, or where protection from EMI is needed. These types of contacts are typically used in radio transmission and broadcasting equipment, medical imaging devices, computers and other electronic equipment, and satellite receivers. In order to ensure that the contact has a low impedance connection, it is designed with contact openings that are wide enough for the electrical current to pass through unimpeded. Additionally, the contacts provide a shielded interface to ensure that EMI is kept to a minimum.Overall, the 4633AF51K00480 contact provides a low impedance connection with a shielded interface. This contact is typically used in applications where high levels of EMI are present, or where protection from EMI is needed. The contact’s design ensures a low impedance connection between the electrical components and the environment, which reduces the amount of EMI that can be detected by external sources. Additionally, the contact’s design provides a shielded interface between the electrical components and the environment, which further reduces the amount of EMI that can be detected.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description