Allicdata Part #: | 465233-5-ND |
Manufacturer Part#: |
465233-5 |
Price: | $ 602.91 |
Product Category: | Tools |
Manufacturer: | TE Connectivity AMP Connectors |
Short Description: | SLUG BLADE |
More Detail: | N/A |
DataSheet: | 465233-5 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 548.10000 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The 465233-5 application field and working principle is an important consideration for any crimper, applicator, or press that requires an accessory. The 465233-5 is a device specifically designed for crimping, applying, and pressing. It is a special type of device used to combine separate components with the high intensity needed to reduce vibration and improve precision.
The 465233-5 consists of two components, an upper and a lower clamp plate. The clamps consist of a rectangular plate that fits onto a support plate, which determines the total width of the clamps and the flexibility of the system. The upper clamp plate consists of a spring, a guide pin, and two end plates, while the lower clamp plate consists of two positional screws that control the angle of the clamps. The clamps provide even pressure to each component, resulting in an extremely precise finish.
This device has many uses in the field. For example, it can be used to crimp terminals onto electrical wires, applying and pressing sealant strips onto surfaces, and locking nuts and bolts, among other tasks. It also has many advantages compared to other tools. For example, since the clamps can be adjusted to a range of angles, they can be used to evenly manipulate components of different sizes and shapes, making the process of crimping and applying more efficient. Additionally, the 465233-5 offers better precision than manual tools. The use of the clamps results in more even pressure, making it easier to achieve a uniform finish.
To ensure that the 465233-5 is operating at peak efficiency, certain maintenance is required. For instance, the clamp plates should be inspected and adjusted periodically and the guide pins should be greased regularly to prevent too much friction. In addition, the alignment between the upper and lower clamps should also be checked to ensure that they are properly aligned and capable of providing the same level of pressure on each of the components. As with any other tool, routine maintenance on the 465233-5 will prolong its lifespan and ensure that it continues to provide accurate results.
In summary, the 465233-5 application field and working principle is a device designed to provide uniform pressure on components of different shapes and sizes, allowing for efficient crimping, applying, and pressing. Due to its ability to adjust to a range of angles, the 465233-5 offers superior precision compared to manual tools. In addition, regular maintenance is required to ensure that it operates efficiently. The 465233-5 is an invaluable accessory for any crimper, applicator, or press that requires precise results.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
4652-RC | Bourns Inc. | 0.0 $ | 1000 | FIXED IND 1MH 160MA 19 OH... |
4652 | Keystone Ele... | 0.08 $ | 1000 | THERM PAD 39.62MMX26.67MM... |
87264-4652 | Molex, LLC | 1.89 $ | 1000 | CONN RECEPT 2MM 46POS SID... |
M80-4652605 | Harwin Inc. | 11.73 $ | 39 | DATAMATE J-TEK POS DIL FE... |
M80-4652005 | Harwin Inc. | 10.49 $ | 8 | DATAMATE J-TEK POS DIL FE... |
465233-2 | TE Connectiv... | 239.54 $ | 1000 | SLUG BLADE |
2-465233-5 | TE Connectiv... | 239.54 $ | 1000 | SLUG BLADE |
2-465233-3 | TE Connectiv... | 239.54 $ | 1000 | SLUG BLADE |
2-465233-7 | TE Connectiv... | 239.54 $ | 1000 | SLUG BLADE |
4-465233-2 | TE Connectiv... | 239.54 $ | 1000 | SLUG BLADE |
465284-9 | TE Connectiv... | 314.97 $ | 1000 | COMB ANVIL |
1-465264-4 | TE Connectiv... | 180.46 $ | 1000 | O CRIMPER INSERT |
465284-5 | TE Connectiv... | 267.16 $ | 1000 | COMB ANVIL |
70156-4652 | Omron Automa... | 2.08 $ | 1000 | SYSTEM |
465285-1 | TE Connectiv... | 139.64 $ | 1000 | ANVIL |
465291-1 | TE Connectiv... | 633.06 $ | 1000 | CRIMPER, WIRE-F |
465285-4 | TE Connectiv... | 664.21 $ | 1000 | ANVIL |
465241-6 | TE Connectiv... | 0.69 $ | 1000 | COMB ANVIL |
465274-5 | TE Connectiv... | 333.68 $ | 1000 | ANVIL-PIGTAIL |
465274-1 | TE Connectiv... | 333.68 $ | 1000 | ANVIL-PIGTAIL |
465274-4 | TE Connectiv... | 333.68 $ | 1000 | ANVIL-PIGTAIL |
465284-1 | TE Connectiv... | 333.68 $ | 1000 | COMB ANVIL |
465284-2 | TE Connectiv... | 333.68 $ | 1000 | COMB ANVIL |
465284-4 | TE Connectiv... | 333.68 $ | 1000 | COMB ANVIL |
465290-1 | TE Connectiv... | 333.68 $ | 1000 | COMB ANVIL |
1-465284-1 | TE Connectiv... | 333.68 $ | 1000 | COMB. ANVIL |
3-465233-4 | TE Connectiv... | 471.93 $ | 1000 | SLUG BLADE |
1-465264-8 | TE Connectiv... | 513.51 $ | 1000 | O CRIMPER INSERT |
465233-5 | TE Connectiv... | 602.91 $ | 1000 | SLUG BLADE |
465200202 | C&K | 0.21 $ | 1401 | HDWR SW LOCK WASHR 10-48 ... |
4652-12-0 | Pomona Elect... | 0.0 $ | 1000 | MINIGRABBER/MINIGATOR 12"... |
4652-12-2 | Pomona Elect... | 0.0 $ | 1000 | MINIGRABBER/MINI CLIP 12"... |
4652-24-0 | Pomona Elect... | 0.0 $ | 1000 | MINIGRABBER/MINIGATOR 24"... |
4652-24-2 | Pomona Elect... | 0.0 $ | 1000 | MINIGRABBER/MINIGATOR 24"... |
465203-1 | TE Connectiv... | 76.62 $ | 1000 | GUARD |
465285-2 | TE Connectiv... | 209.46 $ | 1000 | ANVIL |
RETAINER PLATE/STRIP CUTOFF
GAGE PIN ASSEMBLY
LOCATOR MINI EJECTOR
MEP-6T TOUCH SCREEN/MESSAGE SYST
SEATING TI ASSEMBLY
INSET TL ASSY 5 PR 14 COLUMN