469634-4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crimpers, also known as applicators or presses, are machines used to attach a connector or other fitting to a wire or cable. The 469634-4 application field and working principle involves the use of a flat ribbon-like head, called an applicator head, that slides over an electrical wire or cable. The head contains a precision cut die that crimps or applies a series of crimps to the wire or cable to secure it in place. As the die rotates around the wire or cable, the die presses the sides of the wire or cable together to form a secured connection.

469634-4 crimpers are designed for a variety of different tasks. They can be used to shape an electrical connector or other fitting, such as a butt splice connector, to fit over a wire or cable. This makes the connection more secure and reliable. They can also be used to cut a short length of wire or cable to the exact length required. They can also be used to apply heat-shrink tubing to a wire or cable, or to attach termination caps to the wire or cable to protect it from the environment.

The working principle of a 469634-4 application field and working principle is fairly straightforward. When the operator turns on the machine, the applicator head begins to rotate. As it rotates, the die attached to the head cuts the desired shape into the wire or cable. Once the shape has been cut, the die will form a crimp or connection along certain sections of the wire or cable. The machine will then continue to repeat this process as long as the operator keeps the head rotating.

The 469634-4 application field and working principle also include the use of heat-shrink tubing. Heat-shrink tubing is used to protect the electrical wiring and other components from the elements, as well as from moisture and corrosion. Before the heat-shrink tubing is applied, the machine will use a heat source to partially melt the tubing. The heated tubing is then slid over the wire or cable, where it shrinks and forms a tight seal around the wires or cables.

In summary, the 469634-4 application field and working principle involve the use of a crimper, applicator, or press to attach a connector or other fitting to a wire or cable. The applicator head is equipped with a die that forms the desired shape on the wire or cable. Heat-shrink tubing is also used to provide a secure, protective seal around the wire or cable. The machine is controlled by an operator who keeps the head rotating as the die and heat-shrink tubing are applied.

The specific data is subject to PDF, and the above content is for reference