Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rocker Switches

The 47ASP1J1M6RT is a type of rocker switch, used in a variety of applications. A rocker switch consists of a flat, rectangular switch element that is typically used for a low-current, low-voltage application. It can be mounted onto a wide variety of surfaces.

A rocker switch is activated by pushing down or up on its rocker actuator, which protrudes from the switch. The actuator is then pressed down and held in place to activate the switch. A common use for a rocker switch is to turn on or off a device or electrical circuit. For example, they are commonly used in vehicles to turn on the headlights, windshield wipers, or vehicle audio systems.

Rocker switches come in a variety of shapes and sizes, and can be designed for specific applications. They can be used in household appliances such as hair dryers, toasters, and irons. They can also be used in industrial settings to control machines such as refrigerators, conveyor belts, and HVAC systems.

The 47ASP1J1M6RT is a single-pole, single-throw (SPST) rocker switch. The SPST switch has two positions: an on position and an off position. When the switch is turned on, one terminal of the switch is connected to the other terminal. When the switch is turned off, the two terminals are disconnected. This switch can be wired either normally open (NO) or normally closed (NC) depending on the application.

The 47ASP1J1M6RT has a current rating of 10A at 250VAC, a voltage rating of 600VAC, and a maximum contact resistance of 30mΩ. The switch has a UL94V-2 housing and a standard IEC 60947-5-1 certification. This switch is typically mounted on a vertical surface and is suitable for most environments.

In conclusion, the 47ASP1J1M6RT is a type of rocker switch designed for a variety of applications. It has two positions (on/off) and can be wired either normally open or normally closed depending on the application. It is rated for 10A at 250VAC, with a voltage rating of 600VAC, and a maximum contact resistance of 30mΩ. The switch has a UL94V-2 housing and a standard IEC 60947-5-1 certification.

The specific data is subject to PDF, and the above content is for reference