Allicdata Part #: | 4N45-060E-ND |
Manufacturer Part#: |
4N45-060E |
Price: | $ 0.75 |
Product Category: | Isolators |
Manufacturer: | Broadcom Limited |
Short Description: | OPTOISO 3.75KV DARL W/BASE 6DIP |
More Detail: | Optoisolator Darlington with Base Output 3750Vrms ... |
DataSheet: | 4N45-060E Datasheet/PDF |
Quantity: | 1000 |
3050 +: | $ 0.67977 |
Output Type: | Darlington with Base |
Base Part Number: | 4N45 |
Supplier Device Package: | 6-DIP |
Package / Case: | 6-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -40°C ~ 85°C |
Vce Saturation (Max): | -- |
Current - DC Forward (If) (Max): | 20mA |
Voltage - Forward (Vf) (Typ): | 1.4V |
Current - Output / Channel: | 60mA |
Voltage - Output (Max): | 7V |
Series: | -- |
Input Type: | DC |
Rise / Fall Time (Typ): | -- |
Turn On / Turn Off Time (Typ): | 5µs, 150µs |
Current Transfer Ratio (Max): | 1000% @ 10mA |
Current Transfer Ratio (Min): | 200% @ 10mA |
Voltage - Isolation: | 3750Vrms |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators are components that are commonly used in electronic circuits to provide electrical isolation between two circuits that are connected (usually in a digital electronics application). The 4N45-060E is a specific type of optoisolator, known as a transistor, photovoltaic output. This type of optoisolator uses a transistor to switch an electronic signal and a light-activated semiconductor to provide electrical isolation between two circuits.
The 4N45-060E is typically used in industrial electronic applications including automated controls, motor drives, motion control systems, safety systems, and building automation systems. This optoisolator can be used to provide electrical isolation between the input signals and the output signals that are sent or received through different parts of an electronic system. This ensures that the input signal is not affected by any external disturbances, making the system more reliable and preventing accidental damage or system failure.
The 4N45-060E is designed to be triggered by a voltage signal, typically between 12 and 24 volts. This optoisolator will detect the voltage signal and turn on the transistor to connect the two circuits. When the transistor is activated, the signal will be transmitted to the light-activated diode, which acts as an isolator between the two circuits. It will then produce a voltage pulse that will travel to the output circuit and turn on the load.
The 4N45-060E is designed to provide electrical isolation between input and output circuits up to 1000 volts. This means that it can be used in applications where higher voltage signals need to be transmitted or received. It also provides a level of noise immunity, preventing EMI (electromagnetic interference) from affecting the system. In addition, the optoisolator only uses a small amount of power, making it an efficient and cost-effective solution for applications requiring electrical isolation.
In conclusion, the 4N45-060E optoisolator is an ideal solution for industrial applications requiring electrical isolation between two circuits. It uses a transistor to switch an electronic signal and a light-activated semiconductor to provide electrical isolation and is designed to work with voltage signals between 12 and 24 volts. It offers a high level of noise immunity and can provide up to 1000 volts of electrical isolation, making it an efficient and practical choice for a variety of industrial applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
4N45-000E | Broadcom Lim... | 0.73 $ | 1000 | OPTOISO 3.75KV DARL W/BAS... |
4N45-500E | Broadcom Lim... | 0.75 $ | 1000 | OPTOISO 3.75KV DARL W/BAS... |
4N45-060E | Broadcom Lim... | 0.75 $ | 1000 | OPTOISO 3.75KV DARL W/BAS... |
4N45-300E | Broadcom Lim... | 0.75 $ | 1000 | OPTOISO 3.75KV DARL W/BAS... |
4N45 | Broadcom Lim... | 0.92 $ | 1000 | OPTOISO 3.75KV DARL W/BAS... |
4N45#500 | Broadcom Lim... | 0.95 $ | 1000 | OPTOISO 3.75KV DARL W/BAS... |
4N45#060 | Broadcom Lim... | 0.95 $ | 1000 | OPTOISO 3.75KV DARL W/BAS... |
4N45#300 | Broadcom Lim... | 0.95 $ | 1000 | OPTOISO 3.75KV DARL W/BAS... |
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...