Allicdata Part #: | 516-1021-5-ND |
Manufacturer Part#: |
4N45 |
Price: | $ 0.92 |
Product Category: | Isolators |
Manufacturer: | Broadcom Limited |
Short Description: | OPTOISO 3.75KV DARL W/BASE 6DIP |
More Detail: | Optoisolator Darlington with Base Output 3750Vrms ... |
DataSheet: | 4N45 Datasheet/PDF |
Quantity: | 1000 |
2400 +: | $ 0.84341 |
Output Type: | Darlington with Base |
Base Part Number: | 4N45 |
Supplier Device Package: | 6-DIP |
Package / Case: | 6-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -40°C ~ 85°C |
Vce Saturation (Max): | -- |
Current - DC Forward (If) (Max): | 20mA |
Voltage - Forward (Vf) (Typ): | 1.4V |
Current - Output / Channel: | 60mA |
Voltage - Output (Max): | 7V |
Series: | -- |
Input Type: | DC |
Rise / Fall Time (Typ): | -- |
Turn On / Turn Off Time (Typ): | 5µs, 150µs |
Current Transfer Ratio (Max): | 1000% @ 10mA |
Current Transfer Ratio (Min): | 200% @ 10mA |
Voltage - Isolation: | 3750Vrms |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators are electronic systems that provide electrical isolation between switches and other parts of an electronic circuit. A 4N45 optoisolator is a unit in which the input is an LED with a transistor or photovoltaic output. The term ‘4N45’ stands for 4-coaxial pins of nocturnally incompatible 4-layer LEDs.
The 4N45 optoisolator is a type of device used to isolate two parts of an electronic circuit from one another. The device is commonly used in industrial and commercial applications and provides protection from various electrical signals such as high voltage, high frequency, radio frequency interference, etc. The device can prevent damage to the electronic components that may be sensitive to voltage spikes or other electrical disturbances.
The 4N45 optoisolator is a four-pin device that requires a simple connection for its operation. The device has an input connection, an output connection, and two grounding pins. The input pin is usually connected to either a DC or AC power source and it carries the signal from the source. The output pin is usually connected to the output device, such as a relay or a motor. The two ground pins are for electrical safety and they provide a reference voltage point. When power is applied to the input, the voltage is conducted through the circuit and the transistor or photovoltaic device is activated.
The 4N45 optoisolator can be used in a variety of applications and it is used to reduce the strength of an electrical signal within a certain range. This type of device is widely used for applications that require low voltage protection or isolation from external signals. Additionally, the 4N45 is used to protect sensitive electronic components from being damaged by high voltage in circuits that involve motors or other moving parts.
The working principle of a 4N45 optoisolator is quite simple. The device takes an input signal and converts it into a light signal. The light signal is then amplified and then sent to an output device. The output device may be a relay, a motor, or any other device which is sensitive to light signals. The device is designed to provide a safety barrier between the two parts of the circuit, and it prevents excessive voltage from reaching sensitive components.
The 4N45 optoisolator is a very useful device and is used in a wide variety of applications. It is used for both residential and commercial applications and it is commonly used to provide electrical isolation between parts of a circuit. The device is easy to install and requires very little maintenance. This type of optoisolator provides effective protection from electrical interference and high voltage surges.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
4N45-000E | Broadcom Lim... | 0.73 $ | 1000 | OPTOISO 3.75KV DARL W/BAS... |
4N45-500E | Broadcom Lim... | 0.75 $ | 1000 | OPTOISO 3.75KV DARL W/BAS... |
4N45-060E | Broadcom Lim... | 0.75 $ | 1000 | OPTOISO 3.75KV DARL W/BAS... |
4N45-300E | Broadcom Lim... | 0.75 $ | 1000 | OPTOISO 3.75KV DARL W/BAS... |
4N45 | Broadcom Lim... | 0.92 $ | 1000 | OPTOISO 3.75KV DARL W/BAS... |
4N45#500 | Broadcom Lim... | 0.95 $ | 1000 | OPTOISO 3.75KV DARL W/BAS... |
4N45#060 | Broadcom Lim... | 0.95 $ | 1000 | OPTOISO 3.75KV DARL W/BAS... |
4N45#300 | Broadcom Lim... | 0.95 $ | 1000 | OPTOISO 3.75KV DARL W/BAS... |
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...