511SAA13M5600BAGR

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	18mA
Height - Seated (Max):	0.050" (1.28mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	26mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	Si511
Voltage - Supply:	1.8V
Output:	CMOS
Function:	Enable/Disable
Frequency:	13.56MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are a type of electronic circuit which produces a periodic signal output, such as a sine wave or square wave, or combinations of these. Oscillators have many different purposes and uses, which can range from generating a stable clock signal for synchronizing digital circuits to providing an AC voltage supply to an AC motor. The 511SAA13M5600BAGR oscillator is one such circuit and it is typically used to provide a stable signal for digital and analogue communication systems. In this article, we will explore the application field of this oscillator, and discuss its working principle.

Application Field

The 511SAA13M5600BAGR is a CMOS type oscillator specifically designed for use in wireless systems, including the 2.4 GHz frequency for IEEE 802.11b/g/n Wi-Fi or Bluetooth applications. With its broad operation range - from 0.25″H/ MHz to 200MHz - this oscillator enjoys high stability and low power consumption when compared to crystal oscillators. The 511SAA13M5600BAGR is available in a variety of configurations for operation in a range of voltage and power supply conditions.The 511SAA13M5600BAGR can also be used in a range of ethernet, serial and parallel communication systems. This oscillator has a wide temperature range, enabling it to be used in an environment ranging from -40°C to 85°C. This oscillator also offers a low power shutdown mode for applications needing extended battery life. Furthermore, this oscillator can be used as a low-cost replacement for a Crystal Oscillator, as it performs similarly but with lower power consumption, though at the cost of larger size and lower frequency stability.

Working Principle

The 511SAA13M5600BAGR oscillator is a voltage-controlled oscillator based on CMOS technology. It consists of an amplifier, a frequency selective circuit, and an oscillation circuit with on-chip trimming to adjust the frequency of oscillation. Furthermore, the CMOS circuit is also protected against ESD and over-temperature events.The amplifier receives an external reference voltage, which is used to adjust the output frequency through the frequency selective network. The capacitors in this circuit will adjust the gain of the amplifier, which will in turn affect the frequency of the output signal. The output of the amplifier is then fed into the oscillation circuit, which also includes an on-board adjustable resistor to further fine tune the output frequency. The output of the oscillation circuit is the periodic wave signal, which can be used in applications such as wireless communication.

Conclusion

The 511SAA13M5600BAGR oscillator is a CMOS voltage-controlled oscillator, designed primarily for use in wireless communication systems. This oscillator has a wide frequency range and a wide temperature range, making it suitable for a variety of applications. The oscillator works by receiving a reference voltage from an amplifier, which is then adjusted by the frequency selectivity and oscillation circuit. The output of the oscillator is a periodic wave signal, which can be used in various applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description