511SCA-ABAG

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	18mA
Height:	0.050" (1.28mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	26mA
Spread Spectrum Bandwidth:	--
Operating Temperature:	-40°C ~ 85°C
Frequency Stability (Total):	±30ppm
Series:	Si511
Voltage - Supply:	1.8V
Output:	CMOS, Dual (Complimentary)
Function:	Enable/Disable
Available Frequency Range:	100kHz ~ 124.999MHz
Programmable Type:	Programmed by Digi-Key (Enter your frequency in Web Order Notes)
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p> Programmable Oscillators are a type of electronics component that can be rearranged to suit a wide variety of practical applications. These oscillators typically consist of two integrated circuits (ICs) which are connected by an electrical connection, like a wire or PCB. The two ICs are usually the same type, but contain different features and components to control the frequency, or timing of the oscillator.511SCA-ABAG oscillators are one type of programmable oscillators and are designed to meet the requirements of the military and avionics industry. It consists of a specially designed single chip microcontroller and a custom logic chip. The microcontroller includes a wide variety of peripherals, including analog-to-digital converters (ADC), digital-to-analog converters (DAC), a clocked oscillator, and other programmable logic. The custom logic chip contains an array of base-oscillator cells, gates, and flip-flops for access and control.</p><p>The working principle behind the 511SCA-ABAG oscillator is fairly simple. The microcontroller is used to access and control the logic chip. When a signal is applied to the microcontroller input, it activates the logic chip\'s base-oscillator cells to begin oscillation. Internally, the cells are configured to provide frequency values between 0.3 MHz and 512 MHz. This frequency data is then used to generate the output signal via the DAC, where the signal is then output from the microcontroller.</p><p>The 511SCA-ABAG oscillator is capable of producing signals with a high accuracy and low jitter. This makes it ideal for applications where high frequency and long run times are required. For example, it may be used in the military or avionics industry to control the timing of communications, radar, or GPS systems. It has also been used in consumer electronics, such as mobile phones, audio systems, and home appliances.</p><p>In addition to its general uses, the 511SCA-ABAG oscillator has been used in several specific applications. For example, it has been used in the design of aircraft using the ABAG guidance system. It has also been used in a commercial GPS system, as well as in the design of a medical diagnostic device.</p><p>The 511SCA-ABAG oscillator is a useful and versatile tool for many applications. Its high accuracy and low jitter makes it ideal for use in military and avionics applications. It can also be used in consumer electronics and medical diagnostics, making it a great choice for a wide variety of uses.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description