512ABB000110AAGR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators, such as the 512ABB000110AAGR, enable designers to select a frequency with only two external pins. The oscillator can be factory set, allowing the user to select a frequency without the need for additional components or programming. The details and practical applications of the 512ABB000110AAGR are considered here.

514ABB000110AAGR Application Field

The 512ABB000110AAGR is suitable for use in clock signal generation in a variety of microcontrollers, CPUs, memory and logic devices. It is especially suited for use in different kinds of digital integrated circuits, such as CPUs and clock signal generators. It is also suitable for use in digital signal processors, for applications such as image and audio processing.

The 512ABB000110AAGR can be used in a wide range of applications, including embedded systems, industrial, automotive, communications, and consumer electronics. It can be used for designs up to 400MHz, making it suitable for most high-performance digital systems.

512ABB000110AAGR Working Principle

The 512ABB000110AAGR is a frequency synthesizer. It works by using two external pins to select a specific frequency. The two pins are connected to a resistor network, which is used to set the corresponding frequency. The frequency is then programmed into the device using additional programming commands.

Once the frequency has been selected, the device is then programmed with an additional set of programming commands. These commands are used to control the internal components of the device, such as the oscillator circuit and the programming logic. These commands are used to set the frequency of the oscillator, as well as any other parameters that need to be controlled.

Once the programming has been completed, the internal components of the device are then programmed to generate the desired frequency. The oscillating signal is then sent to signal out the chip. This oscillating signal is then amplified and sent out as the target clock signal.

Conclusion

The 512ABB000110AAGR is a pin configurable/selectable oscillator suitable for use in a range of applications. It has the capability to select a specific frequency, as well as being programmed with additional commands. The device can generate clock signals up to 400MHz, and is suitable for use in embedded systems, industrial, automotive, and consumer electronics.

The specific data is subject to PDF, and the above content is for reference