512FBA000912BAGR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A pin configurable or selectable oscillator is a type of electrical circuit that uses a combination of capacitors and integrated resistors to generate a frequency output in response to an input signal. These oscillators are designed to be used in a wide range of applications, such as radio receivers, cellular telephones, and digital circuits. The 512FBA000912BAGR is one such selectable oscillator.

The 512FBA000912BAGR selectable oscillator features a maximum operating voltage of 5.5 volts and is capable of producing both low- and high-frequency outputs. It is also able to produce both sine and square waveforms, with a step size resolution of 10mV. The oscillator is capable of producing frequencies ranging from 8 Hz to 1627 kHz, with a signal bandwidth of up to 150 MHz.

The 512FBA000912BAGR selectable oscillator is typically used in applications where the signal must be frequency-divided to reduce its frequency. This could include applications such as radio receivers or cell phone transceivers that require low-frequency signal frequencies to be reduced. The 512FBA000912BAGR is also used in communications systems, where the oscillator is used to provide the necessary clock signal for the system\'s communications protocol. In addition, the 512FBA000912BAGR is used to synchronize two or more clock signals in digital systems to ensure that all of the signals stay in sync.

The working principle behind the 512FBA000912BAGR selectable oscillator is a combination of fixed resistors and variable capacitors. The fixed resistors are connected between the DC voltage supply and the output node. The variable capacitors, on the other hand, are connected between the ground and the output node. Depending on the frequency output desired, the capacitors will be adjusted to interact with the fixed resistors and form a periodic wave of the desired frequency. The amplitude of the output waveform is also adjustable through the use of the capacitors.

In most applications, the 512FBA000912BAGR selectable oscillator is used for frequency-division tasks. It is also used for applications that require a precise and consistent waveform with a very wide bandwidth. The adjustable bandwidth of the 512FBA000912BAGR oscillator allows it to be used in many different applications and will continue to be a popular choice in the future.

The specific data is subject to PDF, and the above content is for reference