516BHB000748AAG

Function:	Enable/Disable
Current - Supply (Disable) (Max):	22mA
Package / Case:	6-SMD, No Lead
Height:	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Current - Supply (Max):	26mA
Operating Temperature:	-40°C ~ 85°C
Frequency Stability:	±20ppm
Voltage - Supply:	3.3V
Output:	LVDS
Series:	Si516
Frequency - Output 4:	--
Frequency - Output 3:	--
Frequency - Output 2:	--
Frequency - Output 1:	148.5MHz
Type:	VCXO
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 516BHB000748AAG, also known as a pin configurable/selectable oscillator, is an oscillator used in the applications of telecommunications, networking and so on. It is a versatile device that has a straightforward design and does not require complicated programming. This oscillator can be configured for different frequencies, output waveforms and other parameters by manipulating its pin configurations.

Features

The 516BHB000748AAG offers a wide range of features, including:

• Configurable frequency range from 0.61MHz to 25MHz
• CMOS, LVPECL, HCSL and LVDS output waveforms
• Systems-on-chip (SoC) compatible
• Low noise
• Low power consumption
• Power supply voltage of 1.8V to 3.3V
• Operating temperature from -20°C to 85°C
• Low EMI design

Applications

The 516BHB000748AAG is used in a variety of applications, such as timing, synchronization, and clocking for telecommunications, networking, and audio. It is also suitable for industrial, medical, and instrumentation applications. In addition, this oscillator is suitable for embedded processor applications, such as digital signal processing (DSP), clock and data recovery (CDR), and data storage.

Working Principle

The 516BHB000748AAG has two parts. The first part, the oscillator, uses a quartz crystal as a frequency source. The quartz crystal is cut in a specific shape and size which determines its resonance frequency. The quartz crystal is attached to a circuit, and when voltage is applied, the quartz crystal vibrates at its resonance frequency producing an oscillating voltage signal. The second part of the oscillator, the buffer, is a small amplifier circuit which amplifies the oscillating voltage signal from the quartz crystal. The output signal from the buffer is the oscillator’s output waveform. The frequency, amplitude and phase of the output waveform can be adjusted by modifying the pin configurations of the oscillator. This allows the user to create custom frequencies, output waveforms and other parameters.

Conclusion

The 516BHB000748AAG is a pin configurable/selectable oscillator that can be used in a variety of applications. It is designed to provide a wide range of features, including configurable frequencies, output waveforms, low power consumption and low EMI design. The oscillator is simple to operate and can be easily configured for different frequencies, output waveforms and other parameters by manipulating its pin configurations.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description