516BEB000270AAG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators are widely used in electronic circuits and equipment to generate accurate signals with a wide range of frequencies. The 516BEB000270AAG is a pin configurable/selectable oscillator that can generate a wide range of frequencies and is designed for high frequency applications.

The 516BEB000270AAG is a five-pad device and is configured using external components. The oscillator comes in a small package size (1.0mm x 1.6mm x 0.5mm). It has an operating voltage range of 3.3V to 5V and can operate at a temperature range of -40°C to 85°C. The device also boasts a low power consumption of less than 5µA. The frequency range of the oscillator can be selected from 1MHz to 200MHz, depending on the external components used.

The 516BEB000270AAG is an ideal choice for applications that require high frequency signals with low power consumption. It can be used in automotive, consumer electronics, test and measurement, RF and microwave applications, as well as in industrial, medical and communications systems.

The oscillator works on the principle of voltage-controlled oscillators (VCOs). A VCO is a circuit that produces an output signal at a frequency proportional to the voltage applied to its control terminal.The 516BEB000270AAG uses a voltage controlled crystal oscillator (VCXO) to generate its output signal. A VCXO is an oscillator that uses a crystal, instead of an inductor or capacitor, as the frequency-determining component. The crystal used in the VCXO can be adjusted to correct any frequency inaccuracies.

The 516BEB000270AAG incorporates an I2C interface that allows the oscillator to be controlled digitally. This makes it easy to use and configure, as it can be easily connected to microcontrollers, allowing for selection of the desired frequency with a single command. The device also allows for selection of the output waveform, allowing for both sine and square waveforms with a TTL logic level.

The 516BEB000270AAG is a highly reliable and accurate frequency control solution for high frequency applications. It is easy to set up and use due to its pin configurability and I2C interface. It is a low cost, low power device that offers great performance in applications that require accurate and reliable frequency signals.

The specific data is subject to PDF, and the above content is for reference