5446147

Voltage - UL:	300V
Insulation Height:	0.472" (12.00mm)
Contact Tail Length:	0.154" (3.90mm)
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	--
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	--
Wire Gauge or Range - AWG:	--
Series:	BCH
Current - UL:	15A
Voltage - IEC:	400V
Current - IEC:	12A
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	Vertical
Pitch:	0.197" (5.00mm)
Number of Levels:	1
Positions Per Level:	8
Number of Positions:	8
Type:	Header, Male Pins, Shrouded (4 Side)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks – Headers, Plugs and SocketsTerminal Blocks – Headers, Plugs and Sockets are a specialized form of electrical connector specifically used for connecting electrical wiring in telecommunication systems, for various reasons, such as creating an electrical connection between the system and external equipment, connecting internal wiring within the system, and disabling a device when necessary.These types of connectors are available in two primary varieties: header and plug. Connectors with headers consist of a fixed bulkhead with pins or projecting contacts that links to the system. Plugs are the opposite, with pins or contacts that fit into sockets.The typical Terminal Blocks – Headers, Plugs and Sockets is composed of an insulative material, a conductor, and a terminal block. The insulator helps to protect the electrical connection from heat, chemical corrosion, and other environmental damages. The conductor is designed to carry electricity, and the terminal block provides the connection point for wiring.The particular application and working principle of a Terminal Block – Headers, Plugs and Sockets is determined by the specific requirements of the project. Generally, there are two primary approaches. One approach is to connect the pins in the header directly to other components, with the plugs functioning as the ‘jumper’ between the two. This is a common design for telecommunication systems that do not need to provide additional connections.The second approach uses the plug and socket, or PC board, as the electrical connection point. In this case, the plug and socket provide an interface with the PC board, and each socket connects to a specific component on the board, such as a power transistor or logic element. This type of design is typically used in complex electrical systems, as it provides more flexibility and scalability in connecting different components and subsystems.In either case, the electrical connection between the two components is typically established with a solderless method, such as crimping, soldering, or pressure contacts. This ensures a secure and dependable connection, one that is less likely to come undone over time. It also reduces the amount of time required to create a connection, as pins and wires can be inserted into the header or socket with minimal effort.Terminal Blocks – Headers, Plugs and Sockets can offer greater flexibility and reliability when compared to traditional types of electrical connectors. By using these types of connectors, it is possible to reduce the amount of wiring that is needed for a system, as well as simplify signal routing to specific components. Additionally, the use of Terminal Blocks – Headers, Plugs and Sockets enables complex systems to be designed with a smaller number of wires, resulting in a reduced footprint, and energy savings.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description