5448695

Voltage - UL:	300V
Insulation Height:	0.591" (15.00mm)
Contact Tail Length:	--
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	7mm
Torque - Screw:	0.4-0.5 Nm (3.5-4.4 Lb-In)
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Retention Latches (Non-Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	0.2-2.5mm²
Wire Gauge or Range - AWG:	12-30 AWG
Series:	BCP
Current - UL:	15A
Voltage - IEC:	630V
Current - IEC:	12A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screw
Plug Wire Entry:	180°
Header Orientation:	--
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	13
Number of Positions:	13
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and Sockets

Terminal blocks, headers, plugs and sockets are electrical components used to facilitate the connection of external wires into an electrical circuit. They are usually used to make it easier to change a circuit, and increase its reliability.Terminal blocks are devices consisting of several different types of electrical contacts that are held in place by a metal housing and sometimes a plastic cover. Terminal blocks are designed to provide an electrical connection between multiple devices or multiple conducting paths. They are typically used in industrial, commercial and residential applications.Terminal blocks can be found in a variety of shapes and sizes. Some of the most common types are D-blocks, barrier strips, pluggable terminal blocks, and fuse blocks. D-blocks are single-pin terminal blocks that feature a claw-type clip. Barrier strips are multiple-pin blocks, usually with up to eight positions, used for the connection of multiple circuits. Pluggable terminal blocks are designed to be replaced easily and provide a connection between two points which can be moved easily. Fuse blocks are designed to protect the circuit by isolating a single line of power and using a fuse to break the circuit in the event of an overload condition.The most common type of header is the Ribbon Cable Header, which is found in almost all consumer electronics devices. These headers are designed to accept a flat ribbon cable with multiple conductors, and provide electrical connection between the two sides of the device. Another common type of header is the Single or Dual In-Line Header which is typically used to connect two points of an electrical circuit which are not connected to any other part of the circuit.Plugs and sockets are similar to terminal blocks, but they provide a connection between two devices rather than a circuit. They are made up of a metal housing containing multiple conductors, and a plastic cover. Plug and sockets can be used in a variety of applications including power cords, phone cords, and other various types of electrical connections.Terminal blocks, headers, plugs and sockets all have a few things in common. They are designed to provide an easy and reliable way to create electrical connections between multiple components without having to use individual wires and components. They also provide a secure connection and prevent accidental disconnection due to accidental movement. In addition, they allow for easy replacement or repair of the connection without having to rewire the entire circuit.Terminal blocks, headers, plugs and sockets provide many advantages over traditional wiring methods. They are often used to reduce the amount of wiring that must be installed, as well as simplifying the installation and maintenance of the circuit. Finally, they are a cost effective solution for many applications, making them one of the most popular components for electrical circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description