5452231

Voltage - UL:	300V
Insulation Height:	0.591" (15.00mm)
Contact Tail Length:	--
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	7mm
Torque - Screw:	0.4-0.5 Nm (3.5-4.4 Lb-In)
Screw Size:	M3
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Retention Latches (Non-Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Black
Wire Gauge or Range - mm²:	0.2-2.5mm²
Wire Gauge or Range - AWG:	12-30 AWG
Series:	BCP
Current - UL:	15A
Voltage - IEC:	630V
Current - IEC:	12A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screw
Plug Wire Entry:	180°
Header Orientation:	--
Pitch:	0.197" (5.00mm)
Number of Levels:	1
Positions Per Level:	21
Number of Positions:	21
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and SocketsTerminal blocks, sometimes known as connection blocks, may be used to connect two or more electrical wires to a single connection point. These terminals are typically used in factory automation, process control, and power distribution. They are often found in consumer electronics such as TVs, audio systems, and computers. In many applications, the terminal blocks provide electrical isolation between wires and components, which is critical to the safety of the system.Terminal blocks are available in several different configurations, which are designated by the number of poles they have. Common types include two- and three-pole terminal blocks, which are used for simple connection and disconnection of wiring. Multi-pole and multi-pole pin configurations are also available, which are used for more complex connection applications. These multi-pole terminal blocks are usually made of metal or plastic and can be mounted on standardized 35 mm (DIN) rails for easy installation.Terminal blocks are used in a variety of applications, including motor control, process control, data processing, and power distribution. In motor control applications, terminal blocks can be used to connect the motor to a control circuit, including power, direction, and speed control. In process control and data processing, terminal blocks can be used to connect various types of sensors and signal transmitters.Terminal blocks are also used in power distribution. In this application, terminal blocks connect the incoming power supply to the load (such as a motor or other device). The terminal blocks then provide disconnect capabilities for each of the loads. In this application, the terminal blocks must be rated sufficiently high to carry the load current.Terminal blocks are typically rated for a specified current and voltage. The rating is printed on the outside of the terminal block and includes the maximum current and voltage the terminal block can safely handle. The terminals should always be rated to carry a current greater than the load connected to them to prevent the terminal from overheating from the load current.Terminal blocks typically utilize either a simple screw or spring-clamp style connector for connecting the terminals. The screw-type terminal is the most common and reliable of the two types, but the spring-clamp terminal is often used in applications requiring quick disconnect or reconnection. Additionally, the terminals may utilize different sizes and types of insulation.Terminal blocks are usually made up of two pieces of metal or plastic connected with a hinge, which allows the user to access the electrical connections without breaking the seal of the terminal block. Terminal blocks are often made of plastic or fiberglass insulation-reinforced epoxy for good electrical insulating and temperature resistance. The insulation also helps reduce the possibility of accidental short circuits.Terminal blocks are an important part of any electrical system, providing the necessary connections between wires and components for safe operation. By utilizing proper ratings and insulation, as well as correct installation procedures, terminal blocks are an effective way to keep your system safe and working correctly.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description