550AA000196DGR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 550AA000196DGR is an oscillator integrated circuit used to generate a periodic signal. It belongs to the oscillator family of circuits, which are designed to generate an electrical signal at a certain frequency. The frequency of the signal can be adjusted by adjusting a number of parameters, including the type of feedback network used and the values of the components in the circuit. 

The 550AA000196DGR is designed to generate a signal at a frequency of up to 10 MHz. It features a low-noise power supply (5V) and a wide supply range (3.3V–5V). It also features a low input bias current (50uA) and a wide output swing (1.5V–4.5V). Additionally, its power supply rejection ratio (PSRR) is high at 60dBA.

In addition to its wide supply range and low input bias current, the 550AA000196DGR also features low phase noise and fast startup. It has a typical rms phase noise of -115.6 dBc/Hz and a start-up time of 33.3 ns, with fast settling time of 4.5 µs.

The 550AA000196DGR can be used in a wide range of applications, such as RF communication, industrial automation, medical applications, and consumer electronics.

The working principle of the 550AA000196DGR is based on the principle of negative feedback and a voltage control oscillator (VCO). A voltage control oscillator is an oscillator where the frequency of oscillation is determined by the magnitude of an applied voltage. The frequency of the signal produced by the oscillator is determined by the values of the components in the circuit, as well as the applied voltage. The frequency can be varied by changing either the applied voltage or the values of the components in the circuit.

The 550AA000196DGR utilizes a negative feedback configuration which helps to maintain its frequency stability over a wide range of temperatures. This is achieved by matching the voltage (VCO) and its gain (VGA). The oscillator is then tuned for a specific frequency depending on the application in use. The voltage gain of the VCO is determined by the values of the resistors and capacitors in the feedback network, while the VCO frequency is determined by the value of the capacitor in the loop.

In summary, the 550AA000196DGR is an oscillator integrated circuit designed to generate a range of frequencies up to 10 MHz. It features low noise, wide supply range, low input bias current, and a high power supply rejection ratio. The working principle of the oscillator is based on the principle of negative feedback and voltage control oscillator, where the frequency of oscillation is determined by the magnitude of the applied voltage.

The application fields of the 550AA000196DGR include RF communication, industrial automation, medical applications and consumer electronics.

The specific data is subject to PDF, and the above content is for reference