562000050

Top Termination:	Screws
Material Flammability Rating:	UL94 V-0
Material - Insulation:	Phenol Formaldehyde (Phenolic)
Operating Temperature:	150°C
Mounting Type:	Chassis, Panel
Terminal Screw Finish:	Zinc
Terminal Screw Material:	Steel
Color:	--
Features:	Flange
Barrier Type:	2 Wall (Dual)
Bottom Termination:	Closed
Series:	5600
Wire Gauge:	8-22 AWG
Voltage Rating:	600V
Current Rating:	35A
Number of Rows:	2
Pitch:	0.563" (14.30mm)
Number of Wire Entries:	10
Number of Circuits:	5
Terminal Block Type:	Barrier Block
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks and barrier blocks are two different types of common electrical components that are often found together in many electrical systems. A terminal block is a type of electrical connector used for making electrical connections between two or more wires. It works by providing a conductive surface for the electrical connection to be made. On the other hand, a barrier block is an electrical component that is used to provide a physical barrier between two or more electrical circuits. This is typically used in situations where it is necessary to protect one circuit from another.Terminal blocks and barrier blocks are often integrated into a single unit to create an electrical connection between two or more components. This type of retrofit solution is commonly used in industrial automation applications. The typical advantage of using a combination terminal block and barrier block is that it allows for a simpler, faster, and more cost effective method of connecting different electrical components.In general, a terminal block consists of two or more spring-loaded contact points that are designed to connect two electrical wires or circuits together. It is usually composed of a conductive material such as brass, copper, or other metals. The contact points are typically covered by a plastic or rubber sleeve that helps to prevent accidental contact with the terminals.A barrier block is a type of electrical component that is designed to separate two or more electrical circuits. It can be used to protect one circuit from another, or to prevent interference between different circuits. Typically, a barrier block consists of an insulating material such as plastic or rubber, with a slit or hole in the center for the electrical connection to be made. In some cases, the hole may also contain a set of spring-loaded contact points.One common application of terminal blocks and barrier blocks is in motor control circuits. Motor control circuits, which typically consist of a motor, speed controller, and power source, often require the connection of multiple components. In this case, a terminal block and barrier block can be used to make the necessary electrical connections between each of the components. This makes installation of motor controls quicker and easier, as well as helping to ensure reliable performance and reduce the risk of electrical problems.Terminal blocks and barrier blocks can also be found in other areas of electrical systems such as electronic communication systems. In this case, the barrier blocks are used to protect one communication circuit from another. This helps to reduce the amount of interference between the two circuits while still allowing for reliable communication.Terminal blocks and barrier blocks are important components in many different types of electrical systems. They are designed to provide a safe and reliable way to connect two or more components together, while helping to protect them from potential electrical problems. As such, they are often used in a wide range of applications, ranging from industrial automation to electronic communication systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description