572D475X0025S2T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors

Tantalum capacitors are one of the most widely used types of electrical components in the electronics industry. They are small and relatively lightweight parts that are capable of storing a large amount of electrical energy with very little heat transfer. These components can be used for a wide range of applications, from powering small electronic devices to providing power for large industrial equipment. They are also relatively easy to maintain and generally require very few services or maintenance procedures.

The term "tantalum" refers to the element\'s chemical symbol, Ta, and is derived from Tantalus, a Greek mythological figure who was punished for attempting to steal the gods\' secrets by being submerged in water and having fruit always just out of reach. Likewise, the Tantalum capacitor works by storing charge on a small surface made from a highly efficient conducting Tantalum-oxide layer. This layer is bonded between two dielectric material plates to form a capacitor. This structure allows the capacitor to store excess charge and be used in alternating current applications.

The 572D475X0025S2T is an axial leaded, low profile SMD tantalum capacitor with a 25V rating, 1uF capacitance, and an operating temperature range of -55°C to +125°C. This type of capacitor is primarily used as a low-cost, alternative to aluminum-electrolyte capacitors, and is particularly beneficial in high-frequency and ripple-current applications, due to its fast response time, low equivalent leakage current, and exceptionally low ESR. As far as applications are concerned, the 572D475X0025S2T capacitor is typically used in a variety of DC to DC converters and power supplies, as well as in both industrial and consumer electronics.

The working principle of the 572D475X0025S2T follows the same basic principles as any other capacitor. When exposed to a voltage, an electric field is generated across the two dielectric plates which causes a charge to build up between each plate. This process is known as capacitance and is measured in Farads. Within a tantalum capacitor, the rate at which the plates can store charge is directly related to the quality of the dielectric material between them, although the smaller size of a tantalum capacitor will result in a lower capacitance rating than a similar aluminum-electrolyte model.

In summary, the 572D475X0025S2T is an axial leaded, low profile SMD tantalum capacitor with a 25V rating, 1uF capacitance, and an operating temperature range of -55°C to +125°C. It is primarily used in low-cost DC to DC converters, power supplies, and a variety of both industrial and consumer electronics due to its fast response time, low leakage current and exceptionally low ESR. The working principle of the capacitor is the same as any other capacitor, with the rate at which the plates can store charge being directly related to the quality of the dielectric material used.

The specific data is subject to PDF, and the above content is for reference