58027-03

The 58027-03 application field and working principle refers to a set of standard protocols used to interface with microwave instrumentation systems. This standard protocol is based on the eponymous IEEE standard and is widely used in testing and measurement within the microwave frequency range. This standard was developed by the Institute of Electrical and Electronics Engineers (IEEE) in 1978 and is currently maintained by the IEEE.The 58027-03 application field and working principle describes the application of microwave instrumentation within what is known as the measurement cable range. This range is from 2 GHz to 6GHz, but it is possible to use this standard for measurements outside of this range. This standard defines the physical connections, signal transmission, and protocol translation requirements between two systems. The primary application of these standards are in the fields of radio frequency (RF) testing and microwave testing. They are also used in fields such as radars, navigation systems, telecommunications, and wireless communication systems. In some cases, the 58027-03 application field and working principle is used to interface with antenna systems. The 58027-03 application field and working principle defines the way in which RF measurements are performed in a way that is uniform and predictable. It is designed to enable cross-platform data interchange, as well as provide a standard set of test and measurement protocols for microwave component testing. It also provides a means of calibrating and validating components and equipment. The 58027-03 application field and working principle effectively defines the interface protocol between a measurement instrument, such as a spectrum analyzer, and a device under test. The protocol is divided into three sections: the measurement interface, the SET command, and the measurement request. The measurement interface section of the protocol defines the physical connection between the instrument and the device under test. This includes the electrical connections, signal types, and data rates. The SET command is used to set up the measurement instrument and define the measurement parameters. The measurement request is used to define the test or measurement to be performed and the results that should be returned. The 58027-03 application field and working principle is designed to ensure the accuracy of measurements and to minimize the possibility of errors. By providing a consistent method for communication and information transfer, it reduces the cost of testing and measurement systems while ensuring accuracy and reliability. Additionally, it ensures interoperability among different systems and makes it possible to easily compare the results of different tests.In order to ensure the accuracy of measurements and ensure that the protocols are followed properly, calibration system technicians must be trained on the 58027-03 application field and working principle. As a result, they are able to properly set up the measurement instrument, properly configure the device under test, and accurately interpret the measurement results.The 58027-03 application field and working principle is an important part of the measurement and test industry. It provides system engineers and technicians with a consistent method for reliable data transmission and measurement. As a result, it makes it possible to efficiently test and measure devices within the microwaves.

58027-06	Littelfuse I...	6.66 $	1000	SWITCH RKR DPST
25-5802-10SW	3M	0.69 $	1000	SUPPLIED AIR RESPIRATORY ...
58027-07	Littelfuse I...	7.44 $	1000	SWITCH RKR DPDT
5802.2	Altech Corpo...	25.24 $	1000	INTERFACE RELAY MODULE 1 ...
580200W00000G	Aavid, Therm...	1.72 $	1000	BOARD LEVEL HEAT SINKHeat...
58022	Echelon Corp...	0.0 $	1000	POWER LINE COMM
58027-11	Littelfuse I...	8.73 $	1000	SWITCH RKR DPDT
M2SJ-5802	Omron Electr...	2.95 $	1000	DISPLAY UNIT
58022-01	Littelfuse I...	0.0 $	1000	ROCKER SWITCHRocker Switc...
ACPM-5802-TR1	Broadcom Lim...	--	1000	IC POWER AMPRF Amplifier ...
N3R-5802	Bud Industri...	26.89 $	4	BOX STEEL GRAY 6"L X 4"WB...
58027-01	Littelfuse I...	5.26 $	1000	SWITCH RKR SPST
25-5802-20SW	3M	0.69 $	1000	SUPPLIED AIR RESPIRATORY ...
58022-FRU	Echelon Corp...	0.0 $	1000	POWER LINE COMM
58027-18	Littelfuse I...	14.02 $	1000	SWITCH RKR DPDT
58024-1	TE Connectiv...	2.08 $	1000	TOOL PRESS MANUAL 050 AMP...
58027-08	Littelfuse I...	8.29 $	1000	SWITCH RKR DPDT
58022-UPGRADE	Echelon Corp...	0.0 $	1000	POWER LINE COMM
58026		7.69 $	1000	HEX LA KEY 9/16Hex Key L-...
5802	Johanson Man...	0.0 $	1000	CAPACITANCE RANGE: .35 TO...
58027-04	Littelfuse I...	6.76 $	1000	SWITCH RKR SPDT
M2SA-5802	Omron Electr...	4.61 $	1000	DISPLAY UNIT
5802.3	Altech Corpo...	74.63 $	1000	INTERFACE RELAY MODULE 4 ...
580200B00000G	Aavid, Therm...	0.51 $	4420	HEATSINK 14-16 DIP BLK AN...
58027-03	Littelfuse I...	7.43 $	1000	SWITCH RKR SPDT
26-5802-00SW	3M	686.55 $	1000	SUPPLIED AIR (SA) RESPIRA...
A3SJ-5802	Omron Automa...	6.5 $	1000	RED DISPLAY UNITConfigura...
25-5802-30SW	3M	0.69 $	1000	SUPPLIED AIR RESPIRATORY ...
58027-02	Littelfuse I...	5.97 $	1000	SWITCH RKR SPST