588R192X2CTT

Frequency Stability:	±140ppb
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.083" (2.10mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	3.5mA
Operating Temperature:	-20°C ~ 70°C
Series:	588
Voltage - Supply:	3V
Output:	Clipped Sine Wave
Function:	--
Frequency:	19.2MHz
Type:	TCXO
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The Application Field and Working Principle of 588R192X2CTT Oscillators

The 588R192X2CTT oscillators are devices that generate periodic or continuous electronic signals for many applications. They are commonly used to regulate frequencies in clocks, radio waves, and computer systems. In addition, they have the ability to produce repetitive steady signals for analog to digital and digital to analog converters. They are also used in a variety of electrical and electronic circuits such as audio, telecommunication, and automotive, and in industrial, test, and measurement applications.A 588R192X2CTT oscillator is built using three fundamental components: an amplifier, an active component such as a transistor, and a passive component. These components are used to control the oscillator’s frequency and amplitude. The amplifier is used to provide gain and power to the oscillator so that it can generate a periodic waveform at a desired frequency. The transistor is used to provide feedback and enable the oscillator to operate in a stable, oscillation mode. The passive component, usually a capacitor or inductor, is used to create a feedback loop that allows the oscillator to operate at the desired frequency.The working principle of a 588R192X2CTT oscillator is based on the equation of motion. This equation explains how the voltage and current in a circuit vary with time. This equation also describes the behavior of electrical signals in an oscillator and is used to guide the design of the components. The equation of motion defines the system’s voltage and current response over time and can be used to determine the oscillator’s frequency, amplitude, and phase.Once the design parameters for the 588R192X2CTT oscillator are determined, the components such as filters and amplifiers can be selected and assembled to create the oscillator. This assembly involves connecting the components to a power source and To generate the desired signal, the circuit must be tuned to the desired frequency. This is done by adjusting the resonant frequency of the components and the electrical characteristics of the active and passive components.The 588R192X2CTT oscillator is a useful device in many applications. It is a reliable, efficient, and cost-effective solution for generating periodic waves. It has the advantage of being able to generate a wide range of frequencies and amplitudes and can be used in both analog and digital circuits. It is a versatile device, which can be used in many applications, from clocks and radio waves to industrial equipment and computers.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description