589S300X2CAT Crystals, Oscillators, Resonators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are extensively used in electronics, communications, precision measurement systems and instrumentation. Oscillators generate a steady signal, such as a sine wave, square wave or other waveforms for the purpose of providing a reference signal. Oscillators can be classified into two broad categories - analog and digital. The type of application and the type of waveform desired depend on the type of oscillator.

The 589S300X2CAT oscillator is a digital oscillator that uses a Crystal Oscillator to generate stable reference signals with high accuracy and low drift. It can be used for applications requiring low tolerance levels and high stability. The 589S300X2CAT oscillator has a wide range of operating frequencies, from 3 MHz up to 500 MHz, and is suitable for use in various applications such as frequency control, timing and frequency measurement.

Application Field

The 589S300X2CAT oscillator is designed for multiple applications. It is primarily used in communication systems for frequency control and transmission. It is also suitable for signal processing, such as time-domain and frequency-domain signal analysis, as well as for data synchronisation. It can be used in frequency synthesizers, phase-locked loops and precision clocks. It is also used for frequency measurements and calibration in test and measurement instruments.

Working Principle

The 589S300X2CAT oscillator works by using a quartz crystal oscillator as the oscillator element. The crystal oscillator is a tiny crystal of quartz that vibrates at an extremely regular sounding frequency when a signal is applied to it. This vibration causes an alternating current to flow through the crystal, which in turn produces a voltage waveform at the correct frequency for the application. The crystal oscillator is connected to two amplifier stages. The first stage amplifies the signal to the desired level while the second stage filters the signal to reduce harmonic distortion. The output from the amplifier stages is then fed into the circuit\'s phase-locked loop (PLL) where it is compared to the desired frequency of the application. The PLL produces a signal whose frequency is compared to that of the crystal oscillator. If the frequencies do not match, the PLL adjusts its output to match the frequency of the crystal oscillator.

Conclusion

The 589S300X2CAT oscillator is a highly stable, low-drift digital oscillator designed for precision applications requiring low tolerance levels and high stability. Its wide operating frequency range, from 3 MHz up to 500 MHz, enables it to be used for various functions such as frequency control, timing and frequency measurement. The oscillator works by using a quartz crystal oscillator as its oscillator element, which is connected to two amplifier stages and a phase-locked loop (PLL) circuit. The PLL ensures that the output frequency of the oscillator matches the desired frequency for the application, providing a high level of accuracy and stability.

The specific data is subject to PDF, and the above content is for reference